050-0210 Slimline Rotary Latch Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features a variety of trip levers and mounting axles for ease of mounting and applications.

Designed For

  • Thinner, light or medium weight door applications
  • Door weights up to 75 lbs. (34 kg)
  • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
  • Visible surface installation or concealed installation
  • Applications where it is desireable to have a single position rotor latch
  • Use with TriMark 070-0100 Striker Bolt

Available

  • Left or right hand configurations
  • With standard .265" (6.7 mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles or M6 x 1.0 threaded axles

Material

  • Internal latch components: heat treated smooth edge stamped steel
  • Springs: non-corrosive stainless steel
  • Case halves: high strength steel

Finish

  • Zinc plated, clear chromate steel components

Installation

  • (3) 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
  • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

Internal Lubrication

  • Oven-cured dry lubricant is applied on all critical moving parts

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0210 Slimline Rotary Latch Single-Position

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes

    Topper / Tonneau


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationActuation FeatureStatus CodeSample RequestCAD Drawing
0500210-1-01-1547001-015475-01 Right Hand 1/4-20 UNC Threaded Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm) No Actuation FeatureA/A
0500210-1-04-8093401-035540-01 Right Hand 0.265 (7.3mm) Diameter Through Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
0500210-1-04-8118516-018198-01 Right Hand 0.265 (7.3mm) Diameter Through Axles Non-handed, 2-Holes, 1.25, .625 x 1.08, .250 Dia holes No Actuation FeatureA/A
0500210-1-06-8093416-014953-02 Right Hand M6 X 1.0 Threaded Axles Straight, Non-Handed, 1.25 X .237 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
0500210-2-01-1547001-015476-01 Left Hand 1/4-20 UNC Threaded Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm) No Actuation FeatureA/A
0500210-2-01-2965701-129655-02 Left Hand 1/4-20 UNC Threaded Axles LH, L-shaped, 1.36 L x .91 H, (34.54 mm x 23.11 mm), dipped Torsion SpringA/A
0500210-2-01-2965701-1PC29655-01 Left Hand 1/4-20 UNC Threaded Axles LH, L-shaped, 1.36 L x .91 H, (34.54 mm x 23.11 mm), dipped Torsion Spring A/CP
0500210-2-04-8093401-035549-01 Left Hand 0.265 (7.3mm) Diameter Through Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
0500210-2-04-8093416-019781-01 Left Hand 0.265 (7.3mm) Diameter Through Axles Straight, Non-Handed, 1.25 X .237 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
0500210-2-04-8118516-018197-01 Left Hand 0.265 (7.3mm) Diameter Through Axles Non-handed, 2-Holes, 1.25, .625 x 1.08, .250 Dia holes No Actuation FeatureA/A
0500210-2-06-2537201-025373-01 Left Hand M6 X 1.0 Threaded Axles LH, L-shaped, .83 L x .368 H, .346 Dia hole (21.08 mm x 9.35 mm), holds clinch nut No Actuation FeatureA/A
0500210-2-06-8093416-014952-02 Left Hand M6 X 1.0 Threaded Axles Straight, Non-Handed, 1.25 X .237 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale