• Home
  • Products  /  Accessories  /  
  • 070-0300 .375" (9.5mm) Diameter Striker Bolt

070-0300 .375" (9.5mm) Diameter Striker Bolt

Designed as a companion part for use with TriMark's single rotor latches and cage nuts that requires a .375" (9.5mm) diameter striker bolt. It is available in a variety of lengths with several drive details and mounting thread choices.

 Material

  • Striker bolt: Medium carbon steel, heat treated
  • Washer: Mild steel

Finish

  • Striker bolt: Zinc plated with clear chromate
  • Washer: Galvanized zinc

Caution: Product does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Latch & Striker Installation

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt
  • After installation, check door alignment and door seal pressures

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

070-0300 .375" (9.5mm) Diameter Striker Bolt

Please specify search criteria:


CompareCatalog NumberTriMark NumberShoulder DiameterThread SizeInstalled LengthThread LengthDrive Detail Internal or ExternalWasher Dia. X ThicknessStriker GuardStatus CodeSample RequestCAD Drawing
0700300-00-070-0000-01-00-019126-01 .360/.370 NA 0.70 NA 6mm Internal NA NoA/A
0700300-05-107-0441-10-07-024851-01 0.373 5/16-18 UNC-2A 1.07 0.441 16mm External 1.10 X 0.11 NoA/A
0700300-05-110-0402-02-06-015434-01 0.373 5/16-18 UNC-2A 1.10 0.402 0.187 Internal 1.00 X 0.10 NoA/A
0700300-08-132-0538-03-04-020124-01 0.373 M8 X 1.25-6g 1.32 0.538 0.250 Internal 0.88 X 0.11 NoA/A
0700300-08-132-0538-03-07-018700-01 0.373 M8 X 1.25-6g 1.32 0.538 0.250 Internal 1.10 X 0.11 NoA/A
0700300-08-132-0543-02-07-024120-01 9.5mm M8 X 1.25-6g 1.32 0.543 0.187 Internal 1.10 X 0.11 NoA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale