510-0350 PKE Module/Controller (Unsealed)

TriMark’s e-ASK systems consist of a selection of compatible components that allow for complete keyless entry for on and off-highway vehicle applications.


Contact TriMark to allow us to customize software for your application.

Designed For:
  • Unsealed controller to work with TriMark's Passive Keyless Entry System
  • Incorporation into TriMark mechanical latches and handles by providing keyless entry, security and convenience for access door systems through a RF remote fob electronics
  • SAE J1939 at 250K/500K/1M or RVC to enable communications with other modules
  • Ability to "wake on CAN" messages allows power saving mode

Features/Benefits:
  • 12V DC (or 24V DC) operation
  • Low Power consumption mode draws 4.5mA of electrical current in deep sleep mode
  • SAE J1939 at 250K/500K/1M or RVC to enable communications with other modules
  • Software adaptable to OEM specific requirements
  • Ability to wake other vehicle controllers via CAN
  • 6 configurable (High or Low) inputs
  • 9 Low outputs
  • 10 Low side outputs (500mA)
  • 13 (15) Amp relays
  • 433 MHz Radio Frequency (RF) communication with key fobs (range up to 50m)
  • Ability to control more than 10 different functions via key fob (including CAN messages)
  • 125 KHz Low Frequency (LF) communication with Fobs that enables passive entry, push to start, and immobilization functions
  • Up to 2 exterior doors can utilize passive entry
  • Up to 3 LF antennas can be utilized for fob detection. These are configurable and can be used for exterior for entry, or interior for immobilization
  • LF/RF communication handshakes preventing security threats

Available:
  • Unsealed enclosure with AMP/VAL-U-LOK connectors

Use With
  • TriMark 500-1350 e-ASK PKE System (Unsealed)
  • TriMark 530-0400 PKE e-FOB
  • TriMark 590-1200 PKE Antenna
  • TriMark Capacitive sense enabled products
  • TriMark 550-0100 Power Lock Compact Actuator
  • TriMark 540-0100 e-PAD Keypad
  • TriMark 540-0200 e-GRAB Handle

Installation:
  • I/O module is easily installed with (3) M4 screws (not included) and can be mounted in a concealed location

U.S. Patent No. 8,350,669 / 8,976,014 / 10,385,594 / 10,909,785
U.S. Design Patent No. D907,589

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Open-Source Software: This product may contain embedded software from open-source communities. The open-source software (OOS), copyright, licensing terms and conditions are located at the following link.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

510-0350 PKE Module/Controller (Unsealed)

Please specify search criteria:


CompareCatalog NumberTriMark NumberDescriptionStatus CodeSample RequestCAD Drawing
5100350-1-140443-0112V only,1 A/CP
    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale