030-0500 Pivoting Catch Compartment Latch

This latch was specifically designed for storage and compartment doors for off-road vehicles including agricultural and construction equipment and industrial enclosures. It features a pivoting hook latching design and a reverse paddle design that is suited for top hinged doors and resistance to the insertion of foreign objects.

Designed For

  • On or off-highway vehicle applications- construction, mining, agricultural
  • Service and utility truck body doors
  • Electrical switch and transformer boxes

Features/Benefits

  • Pivoting catch allows relative movement between the door and frame when the vehicle frame flexes
  • Components are spring loaded internally to minimize effects of vibration
  • Reverse paddle design of the compartment latch is suited for top hinged doors and provides resistance to insertion of foreign objects
  • Two levels of performance/duty: The heavy duty version (030-0550) provides a higher level of resistance to vibration and wear 

Available

  • Key locking - keyed alike with most common key codes to match paddle actuators used for operator enclosures
  • Non-locking
  • Pad lockable for increased security
  • Optional hole patterns

Material

  • All steel reinforced construction

Finish

  • Zinc plate, clear chromate conversion coat for maximum paint adhesion and resistance to rust
  • Black powder coat

Installation

  • Lock cylinder may be installed after the latch has been assembled into the door and painted
  • (4) 3/16" M4 diameter steel "pop" rivets, 1/4-20 or M6 screws (not included)

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0500 Pivoting Catch Compartment Latch

  • Construction - Heavy Earthmoving

    Access Panels

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Engine Compartments / Hoods


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments


Please specify search criteria:

 

  • Handing :

 

  • Finish :

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

 

  • Mounting Holes :

 

  • Hook :

 

  • Packaging :

 

  • Park Marking :

CompareCatalog NumberTriMark NumberHandingFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Mounting HolesHookPackagingPark MarkingStatus CodeSample RequestCAD Drawing
0300500-3-000-00-00-00-00-0-0-0-0-1-00000-1-011600-00 Non-Handed No finish No key No key No key Non-locking or N/A NA No NA 0 keys .218 Diameter (5.5mm) Housing only, no hook  TriMark identification only, no PN or date codeA/A
0300500-3-012-00-00-00-02-81190.04-0-0-0-2-12986.01-1-112985-01 Non-Handed Medium Gloss Black No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS220,PK510,NO KEYS No NA 0 keys .266 Diameter (6.8mm) 12986-01 zinc plated Standard TriMark PN and date codeA/A
0300500-3-012-00-00-00-02-81190.08-0-0-0-1-11606.16-1-111662-01 Non-Handed Medium Gloss Black No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS210,D250,NO KEYS No NA 0 keys .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-012-02-01-02-02-81190.00-1-0-2-1-11606.16-1-111662-12 Non-Handed Medium Gloss Black Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS900,CH751,2 KEYS Yes NA 2 keys on ring .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-015-00-00-00-00-0-0-0-0-1-00000-1-011600-16 Non-Handed Zinc Plate/Clear Chromate No key No key No key Non-locking or N/A NA No NA 0 keys .218 Diameter (5.5mm) Housing only, no hook Standard TriMark identification only, no PN or date codeA/A
0300500-3-015-00-00-00-14-0-0-0-0-1-11606.16-1-111608-16 Non-Handed Zinc Plate/Clear Chromate No key No key No key Padlockable NA No NA 0 keys .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-015-00-00-00-14-0-0-0-0-2-11606.16-1-111689-16 Non-Handed Zinc Plate/Clear Chromate No key No key No key Padlockable NA No NA 0 keys .266 Diameter (6.8mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-015-00-00-00-14-0-0-0-0-2-81825.16-1-112166-16 Non-Handed Zinc Plate/Clear Chromate No key No key No key Padlockable NA No NA 0 keys .266 Diameter (6.8mm) 81825-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-015-00-00-00-17-0-0-0-0-1-11606.16-1-111663-16 Non-Handed Zinc Plate/Clear Chromate No key No key No key Cutout for lock without lock supplied NA No NA 0 keys .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-015-02-01-02-02-81190.00-1-0-2-1-11606.16-1-111662-16 Non-Handed Zinc Plate/Clear Chromate Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS900,CH751,2 KEYS Yes NA 2 keys on ring .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-037-00-00-00-00-0-0-0-0-2-11606.16-1-112311-37 Non-Handed Low Gloss Black No key No key No key Non-locking or N/A NA No NA 0 keys .266 Diameter (6.8mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-037-00-00-00-14-0-0-0-0-1-11606.16-1-111608-01 Non-Handed Low Gloss Black No key No key No key Padlockable NA No NA 0 keys .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-037-02-01-02-02-81190.00-1-0-2-1-11606.16-1-112728-01 Non-Handed Low Gloss Black Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS900,CH751,2 KEYS Yes NA 2 keys on ring .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-078-00-00-00-00-0-0-0-0-1-00000-1-011600-02 Non-Handed Low Gloss Black Over E-Coat No key No key No key Non-locking or N/A NA No NA 0 keys .218 Diameter (5.5mm) Housing only, no hook Standard TriMark identification only, no PN or date codeA/A
0300500-3-078-00-00-00-14-0-0-0-0-1-81572.16-1-112059-01 Non-Handed Low Gloss Black Over E-Coat No key No key No key Padlockable NA No NA 0 keys .218 Diameter (5.5mm) 81572-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-079-00-00-00-02-81190.02-0-0-0-1-11606.16-1-111662-02 Non-Handed Medium Gloss Black Over E-Coat No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS950,J.D.,H800,NO KEYS No NA 0 keys .218 Diameter (5.5mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-079-00-00-00-02-81190.04-0-0-0-2-11606.16-1-112747-01 Non-Handed Medium Gloss Black Over E-Coat No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS220,PK510,NO KEYS No NA 0 keys .266 Diameter (6.8mm) 11606-16 zinc plated Standard TriMark PN and date codeA/A
0300500-3-079-00-00-00-02-81190.08-0-0-0-2-15532.01-1-115533-02 Non-Handed Medium Gloss Black Over E-Coat No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS210,D250,NO KEYS No NA 0 keys .266 Diameter (6.8mm) 15532.01 zinc plated Standard TriMark PN and date codeA/A
0300500-3-095-00-00-00-00-0-0-0-0-1-00000-1-011600-05 Non-Handed John Deere Industrial Yellow No key No key No key Non-locking or N/A NA No NA 0 keys .218 Diameter (5.5mm) Housing only, no hook Standard TriMark identification only, no PN or date codeA/A
0300500-3-096-00-00-00-00-0-0-0-0-1-00000-1-011600-06 Non-Handed John Deere Charcoal No key No key No key Non-locking or N/A NA No NA 0 keys .218 Diameter (5.5mm) Housing only, no hook Standard TriMark identification only, no PN or date codeA/A
©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale