Available

• Right or left hand configurations (right hand shown)
• With 1/4-20 UNC, M6 X 1 threaded axles or .286 (7.3mm) thru axles
• Base mounting option

• Internal latch components and case halves: High-strength steel
• Springs: Non-corrosive stainless steel

• Zinc plated, clear chromate steel components

• (2) 1/4-20 UNC or M6 X 1 mounting fasteners (not included)
• Custom mounting brackets available
• Tighten to the manufacturers' recommended torque value, however, do not exceed 100 in-lbs. (11.2 N-m)

CAUTION: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0502 Single Rotor Mini-Latch with Extended Actuator

• 
  Agricultural Tractor / Combine
  

  Engine Compartments / Hoods

  Exterior Storage Compartments

  
  
• 
  Bus / Motorcoach / Mass Transit
  

  Access Panels

  Baggage Doors

  Engine Compartments / Hoods

  Exterior Storage Compartments

  
  
• 
  Construction - Heavy Earthmoving
  

  Engine Compartments / Hoods

  
  
• 
  Construction - Lifting and Material Handling
  

  Access Panels

  Exterior Storage Compartments

  
  
• 
  Construction - Light Earthmoving
  

  Access Panels

  Engine Compartments / Hoods

  Exterior Storage Compartments

  
  
• 
  Fire / Rescue / Ambulance / Emergency Vehicle
  

  Access Panels

  Exterior Storage Compartments

  
  
• 
  Heavy Truck / Sleeper Cabs
  

  Baggage Doors

  Engine Compartments / Hoods

  Exterior Storage Compartments

  Tool Boxes

  
  
• 
  Industrial Enclosure/Cabinet
  

  Access Panels/Cabinet Doors

  Exterior Storage Compartments

  
  
• 
  Motor Homes
  

  Baggage Doors

  Engine Compartments / Hoods

  
  
• 
  Pick-up Truck - Tool Boxes / Topper / Tonneau
  

  Tool Boxes

  Topper / Tonneau

  
  
• 
  Step Van / Walk-in Vans / Delivery Vehicle
  

  Exterior Storage Compartments

  Tool Boxes

  
  
• 
  Trailers - Ranch / Farm / Cargo / Utility
  

  Access Panels

  Exterior Storage Compartments

  Interior Compartments

  
  
• 
  Travel Trailer / 5th Wheel
  

  Baggage Doors

  
  
• 
  Utility Bodies / Wreckers / Specialty Truck
  

  Exterior Storage Compartments

  Tool Boxes

  
  

Please specify search criteria:

	Rotors :		----------- Exclude from Search ------------ 1 = Single Position2 = Two Position
	Handing :		----------- Exclude from Search ------------ 1 = Right Hand2 = Left Hand
	Material and Finish :		----------- Exclude from Search ------------ 015 = Cold Rolled Steel - Zinc Clear Chromate087 = Cold Rolled Steel E-Coat091 = Cold Rolled Steel - Autophoretic (Black)110 = Cold Rolled Steel - Magnicoat Silver
	Mounting :		----------- Exclude from Search ------------ 01 = 1/4-20 UNC Threaded Axles02 = 0.286 (7.3mm) Through Axles03 = M6 X 1.0 Threaded Axles
	Actuation :		----------- Exclude from Search ------------ 16006 = Catch,External Release,Single Rotor,Non Hand,Zinc Plate16978 = Catch,External Release,Single Rotor,Non Hand,Nitrotec17203 = Catch,External Release,Single Rotor,Non Hand,Zinc Plate18503 = Catch,External Release,Single Rotor,Left Hand,Nitrotec18898 = Catch,External Release,Single Rotor,Non Hand,Nitrotec18900 = Catch,External Release,Single Rotor,Right Hand,Nitrotec21488 = External Release,Single Rotor,Non Hand,Nitrotec22886 = External Release,Single Rotor,Non Hand, Zinc Plate22979 = External Release,Single Rotor,Right Hand,Nitrotec23020 = External Release,Single Rotor,Non Hand,Nitrotec24596 = External Release,Single Rotor,Right Hand,Nitrotec,Vinyl Dip26552 = External Release,Single Rotor,Left Hand,Nitrotec26727 = External Release,Single Rotor,Non Hand,Nitrotec27889 = External Release,Single Rotor,Left Hand,Nitrotec28407 = External Release,Single Rotor,Left Hand,Nitrotec29264 = External Release,Single Rotor,Right Hand,Zinc Plate30663 = External Release,Single Rotor,Right Hand,Nitrotec30664 = External Release,Single Rotor,Right Hand,Nitrotec34692 = External Release,Single Rotor,Non Hand,Nitrotec38272 = External Release, Internal Catch,Right Hand,Nitrotec,Plastic Dip51221 = CATCH.VINYL DIP
	Base Mount :		----------- Exclude from Search ------------ 0000000 = No1728001 = Plate,Left hand,1.438 x .875,.344 x.281 slots,Zinc1728101 = Plate,Right hand,1.438 x .875,.344 x.281 slots,Zinc2263901 = Plate,Right hand,1.81 x .88,.344 x .281 slots,Autophoretic2264001 = Plate,Left hand,1.81 x .88,.344 x .281 slots,Autophoretic3039001 = Plate,Right hand,1.719 x 1.059,Zinc5101901 = Plate,Left hand,1.44 x .88,.720 x .281 slots,E-coat5102001 = Plate,Right hand,1.44 x .88,.720 x .281 slots,E-coat
	Collars :		----------- Exclude from Search ------------ 0 = None1 = One Collar, away from spring side2 = One Collar, towards spring side
	Pin :		----------- Exclude from Search ------------ 0 = None1 = One Pin, away from spring side2 = One Pin, towards spring side

     47/47 result(s) match your searching criteria.

• Mechanical
• Accessories