050-0117 Two Rotor Latch With Coaxial Trip

This two rotor latch is designed for medium to heavy-duty applications for on or off-highway compartments and access panels. It features a coaxial trip mechanism for applications where it is desirable to provide additional support to the trip lever with a single position latch.

Technical Publication
Request Sample

Overview
Specification
Typical Uses
View Products
Related Products
Media

Designed For

Door thicknesses of 1-7/8" or greater (47.6mm)
Door weights of 50-200 lbs. (23-91 kg)
Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results)
Applications where it is desirable to provide additional support to the trip lever
Use with TriMark 070-0200 Striker Bolt

Available

In left or right hand configurations (right hand shown)
With (4) 1/4-20 UNC or M6 x 1 threaded axles or .286" (7.3mm) diameter "thru" axles
With trip lever options (please inquire)
With a torsion return spring

Finish

Zinc plated, clear chromate steel components

Material

Internal latch components: Heat treated, smooth edge stamped steel
Case halves: High strength steel
Springs: Non-corrosive stainless steel

Installation

(4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included)
Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
Fastener mounting holes diameter should not exceed .281" (7.1mm)

Internal Lubrication

Oven-cured dry lubricant is applied at factory on all critical moving parts

Striker Installation

Install striker bolt in door frame
Close door carefully and check for interference between head of striker bolt and latch components
Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
Adjust striker bolt vertically so door is not guided upward or downward while being closed
CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
Door should be latched but not "closed" in secondary position with respect to adjacent surfaces in primary position
If both primary and secondary positions are not evident, readjust striker bolt
After installation, check door alignment and door seal pressures

Caution Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

050-0117 Product Performance Summary

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0117 Two Rotor Latch With Coaxial Trip

Agricultural Tractor / Combine
Access Panels
Door Hold Open
Engine Compartments / Hoods
Exterior Storage Compartments
Armored Vehicle
Exterior Storage Compartments
Bus / Motorcoach / Mass Transit
Access Panels
Baggage Doors
Engine Compartments / Hoods
Exterior Storage Compartments
Interior Compartments
Construction - Heavy Earthmoving
Access Panels
Door Hold Open
Engine Compartments / Hoods
Exterior Storage Compartments
Interior Compartments
Construction - Lifting and Material Handling
Access Panels
Door Hold Open
Engine Compartments / Hoods
Exterior Storage Compartments
Interior Compartments
Construction - Light Earthmoving
Access Panels
Door Hold Open
Engine Compartments / Hoods
Exterior Storage Compartments
Interior Compartments
Fire / Rescue / Ambulance / Emergency Vehicle
Access Panels
Exterior Storage Compartments
Heavy Truck / Sleeper Cabs
Baggage Doors
Engine Compartments / Hoods
Exterior Storage Compartments
Interior Compartments
Tool Boxes
Industrial Enclosure/Cabinet
Access Panels/Cabinet Doors
Exterior Storage Compartments
Motor Homes
Baggage Doors
Engine Compartments / Hoods
Interior Compartments
Pick-up Truck - Tool Boxes / Topper / Tonneau
Tool Boxes
Topper / Tonneau
Power Sports
Access Panels
Engine Compartments / Hoods
Replicars / Kit Cars
Engine Compartments / Hoods
Step Van / Walk-in Vans / Delivery Vehicle
Exterior Storage Compartments
Tool Boxes
Trailers - Ranch / Farm / Cargo / Utility
Access Panels
Exterior Storage Compartments
Travel Trailer / 5th Wheel
Baggage Doors
Interior Compartments
Utility Bodies / Wreckers / Specialty Truck
Exterior Storage Compartments
Tool Boxes

Please specify search criteria:

	Handing :
	Mounting :
	Actuation :
	Knob Option :
	Actuation Feature :
	Catch Spring :

13/13 result(s) match your searching criteria.

Compare	Catalog Number	TriMark Number	Handing	Mounting	Actuation	Knob Option	Actuation Feature	Catch Spring	Status Code	Sample Request	CAD Drawing
	0500117-1-01-36665-0-4-01	36660-01	Right Hand	1/4-20 UNC Threaded Axles	Right Hand, Coaxial Trip Lever	None	Rod Collar	Normal Duty Catch Spring	A/A
	0500117-1-06-17452-0-1-02	29186-01	Right Hand	M6 x 1.0 Threaded Axles	Right Hand, Coaxial Pivot, Coated Black Vinyl	None	Torsion Spring	Heavy Duty Catch Spring	A/A
	0500117-1-06-21176-0-1-02	21177-01	Right Hand	M6 x 1.0 Threaded Axles	Finger Release, Right Hand, 1.98 Long	None	Torsion Spring	Heavy Duty Catch Spring	A/A
	0500117-1-06-22074-0-1-01	22075-01	Right Hand	M6 x 1.0 Threaded Axles	FingerRelease, Right Hand, 2.06 x 3.47	None	Torsion Spring	Normal Duty Catch Spring	A/A
	0500117-1-06-32108-0-5-01	32279-01	Right Hand	M6 x 1.0 Threaded Axles	Right Hand Coaxial Trip Lever	None	Additonal Internal Trip Lever	Normal Duty Catch Spring	A/A
	0500117-1-06-32548-0-1-01	32549-01	Right Hand	M6 x 1.0 Threaded Axles	Conventional 2 point L-Shaped, Right Hand Coaxial Actuator	None	Torsion Spring	Normal Duty Catch Spring	A/A
	0500117-1-06-33446-0-1-02	33442-02	Right Hand	M6 x 1.0 Threaded Axles	Coaxial Trip Lever, Pivot	None	Torsion Spring	Heavy Duty Catch Spring	A/A
	0500117-2-01-21832-0-1-01	21833-01	Left Hand	1/4-20 UNC Threaded Axles	Finger Release, Left Hand Coaxial Trip Lever, 1.28, 14 Deg	None	Torsion Spring	Normal Duty Catch Spring	A/A
	0500117-2-06-17079-0-1-01	17078-01	Left Hand	M6 x 1.0 Threaded Axles	Finger Release, Left Hand Coaxial Actuator, .324 x 1.690, No Holes	None	Torsion Spring	Normal Duty Catch Spring	A/A
	0500117-2-06-17453-0-1-02	29185-01	Left Hand	M6 x 1.0 Threaded Axles	Left Hand, Coaxial Pivot, Coated Black Vinyl	None	Torsion Spring	Heavy Duty Catch Spring	A/A
	0500117-2-06-31126-0-1-02	31125-01	Left Hand	M6 x 1.0 Threaded Axles	Left Hand Coaxial Trip Lever	None	Torsion Spring	Heavy Duty Catch Spring	A/A
	0500117-2-06-32026-0-5-01	32027-01	Left Hand	M6 x 1.0 Threaded Axles	Left Hand Coaxial Trip Lever	None	Additonal Internal Trip Lever	Normal Duty Catch Spring	A/A
	0500117-2-06-34320-0-1-01	34321-01	Left Hand	M6 x 1.0 Threaded Axles	Left Hand, Coaxial Trip Lever	None	Torsion Spring	Normal Duty Catch Spring	A/A