050-0410 Floating Striker Single Position Rotor Latch

This single rotor latch is a sub-platform to the TriMark proven 050-0400 series latch and is designed for medium to heavy-duty applications for off-highway compartments and access panels where it is desirable to have a single position latch.

Designed For

Medium to heavyweight doors for off-highway applications requiring resistance to vibration
Door thicknesses of 1-7/8" (47.6 mm) or greater
Door weights of 50-200 lbs. (23-91 kg)
Door seal pressure of up to 150 lbs. (< 50 lbs. suggested for best results)(23-68 kg)
Visible surface installation or concealed inside installation

Features/Benefits

Allows for ± .060 (1.52mm) strike travel from .784 (19.91mm) locating dimension with the recommended .550 (13.9mm) diameter striker bolt (070-0201)
Ideal for applications with high vibration loading and where controlled travel between the latch and strike is characteristic of the application
Single position rotary style latching action

Finish

Zinc plated, clear chromate steel components

Material

Internal latch components: Heat treated, smooth edge stamped steel
Case halves: High strength steel
Springs: Non-corrosive stainless steel

Installation

(4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 type fasteners are required (not included)
Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13 N-m)
Fastener mounting holes diameter should not exceed .281" (7.1 mm)

Available

In left or right hand configurations (right hand shown)
With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286" thru axles
With trip lever options

Internal Lubrication

Oven-cured dry lubricant is applied at factory on all critical moving parts

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0410 Floating Striker Single Position Rotor Latch

Agricultural Tractor / Combine
Access Panels
Door Hold Open
Engine Compartments / Hoods
Construction - Heavy Earthmoving
Access Panels
Door Hold Open
Exterior Storage Compartments
Construction - Lifting and Material Handling
Access Panels
Engine Compartments / Hoods
Exterior Storage Compartments
Construction - Light Earthmoving
Access Panels
Door Hold Open
Engine Compartments / Hoods
Exterior Storage Compartments
Industrial Enclosure/Cabinet
Access Panels/Cabinet Doors
Exterior Storage Compartments
Motor Homes
Engine Compartments / Hoods

Please specify search criteria:

	Handing :
	Mounting :
	Actuation :
	Actuation Feature :
	Actuation Support :

Compare	Catalog Number	TriMark Number	Handing	Mounting	Actuation	Actuation Feature	Actuation Support	Status Code	Sample Request	CAD Drawing
	0500410-1-02-80813-1-1	23780-02	Right Hand	0.286 (7.3mm) Diameter Through Axles	Straight Finger Release, Non-Handed, 2.81 Long	Torsion Spring	Standard Mount	A/A
	0500410-1-06-80647-1-1	30240-01	Right Hand	M6 X 1.0 Threaded Axles	Non-Handed, L-Shaped, .89 X 1.87 X .281 Dia Hole	Torsion Spring	Standard Mount	A/A
	0500410-2-02-11277-2-1	23276-01	Left Hand	0.286 (7.3mm) Diameter Through Axles	Conventional Straight, Left Hand Nose, Version 01 - 1.101, Spring Hole	Extension Spring	Straddle Mount	A/A
	0500410-2-02-80813-1-1	28515-01	Left Hand	0.286 (7.3mm) Diameter Through Axles	Straight Finger Release, Non-Handed, 2.81 Long	Torsion Spring	Standard Mount	A/A
	0500410-2-06-80647-1-1	12200-01	Left Hand	M6 X 1.0 Threaded Axles	Non-Handed, L-Shaped, .89 X 1.87 X .281 Dia Hole	Torsion Spring	Standard Mount	A/A