030-0175 Stamped Steel Compartment Latch

This compartment latch was designed for light to medium duty storage and compartment doors. Available in buffed stainless steel or plated mild steel, this product features an integrated rotary latch for ease of installation and use and is available in a power lockable version.

Designed For

  • On or off-highway vehicle applications
  • Service and utility truck body doors
  • Fire and rescue unit vehicles
  • Most storage, compartment and access doors with latch and strike location at top or sides of door
  • Door weights of approximately 75 (34 kg) lbs. or less

Available

  • In locking or non-locking configurations
  • Keyed alike
  • Keyed random. 50 keycodes available
  • 2-point pivot plate for doors that require a 2-point latching mechanism (030-0185)
  • Optional gasket for flange of housing is available to provide resistance to water and dirt infiltration
  • Power lock actuation
  • Customer logo on paddle (please inquire)

Finish

  • Buffed and polished stainless steel
  • Zinc plate clear chromate conversion coat over mild steel for maximum paint adhesion and resistance to rust

Material

  • Housing and paddle: 300 series stainless steel
  • Mild steel also available on housing and paddle
  • Other components: zinc plated, mild steel
  • Internal latch components: case hardened, smooth edge stamped steel
  • Stainless steel non-corrosive springs and rivets

Installation

  • 3/16" (4mm) diameter fasteners
  • Blind mount option also available

Application Recommendations

  • Striker bolt installation should allow for a minimum radial movement of .060 (1.524) for adjustment
  • Rubber bumpers or door seals are recommended to reduce effects of vibration stress on door and latch system

CAUTION: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Latch & Striker Installation

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCH POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0175 Stamped Steel Compartment Latch

  • Construction - Lifting and Material Handling

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Exterior Storage Compartments


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Storage Compartments


  • Industrial Enclosure/Cabinet

    Exterior Storage Compartments


  • Motor Homes

    Engine Compartments / Hoods


  • Power Sports

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments


  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Storage Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:

 

  • Handing :

 

  • Material and Finish :

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

 

  • Power Lock :

 

  • Mounting Pattern :

 

  • Packaging :

 

  • Logo :

 

  • Housing Center Embossment :

CompareCatalog NumberTriMark NumberHandingMaterial and FinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Power LockMounting PatternPackagingLogoHousing Center EmbossmentStatus CodeSample RequestCAD Drawing
0300175-3-000-00-00-00-17-0-0-0-0-0-01-2-00-115647-10 Non-Handed Stainless Steel No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Layered in tub None YesA/A
0300175-3-000B-00-00-00-00-0-0-0-0-0-00-1-00-022477-01 Non-Handed Stainless Steel, Buffed No key No key No key Non-locking or N/A NA No NA 0 keys No No Mounting Boxed None NoA/A
0300175-3-000B-00-00-00-00-0-0-0-0-0-01-1-00-112937-01 Non-Handed Stainless Steel, Buffed No key No key No key Non-locking or N/A NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-00-00-00-02-14075.08-0-0-0-0-01-1-00-023103-05 Non-Handed Stainless Steel, Buffed No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS210,D250,OFS,.755 No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-00-00-00-02-14075.08-0-0-0-0-01-1-00-116268-16 Non-Handed Stainless Steel, Buffed No key No key No key Non-master keyed/keyed alike LOCK,CAM,SS,KS210,D250,OFS,.755 No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-01-1-00-022460-02 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-01-2-00-115647-01 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Layered in tub None YesA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-02-1-00-022460-03 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed None NoA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-02-1-00-116400-02 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed None YesA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-02-1-01-116400-01 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed Fibre Body YesA/A
0300175-3-000B-00-00-00-17-0-0-0-0-0-03-1-00-022460-04 Non-Handed Stainless Steel, Buffed No key No key No key Cutout for lock without lock supplied NA No NA 0 keys No 4.00 (101.6mm) X 3.90 (99.1mm) X #8-32 Stud Boxed None NoA/A
0300175-3-000B-02-01-01-02-17044.01-1-0-2-0-01-1-00-023103-04 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap Blank logo Non-master keyed/keyed alike LOCK,CAM,SS,KS270,TM700,2 KEYS Yes NA 2 keys on ring No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-02-01-01-02-17044.01-1-0-2-0-01-1-00-116268-13 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap Blank logo Non-master keyed/keyed alike LOCK,CAM,SS,KS270,TM700,2 KEYS Yes NA 2 keys on ring No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-02-01-01-02-17044.01-1-0-2-0-03-1-00-023105-01 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap Blank logo Non-master keyed/keyed alike LOCK,CAM,SS,KS270,TM700,2 KEYS Yes NA 2 keys on ring No 4.00 (101.6mm) X 3.90 (99.1mm) X #8-32 Stud Boxed None NoA/A
0300175-3-000B-02-01-01-02-17044.01-1-0-2-0-03-1-00-119349-01 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap Blank logo Non-master keyed/keyed alike LOCK,CAM,SS,KS270,TM700,2 KEYS Yes NA 2 keys on ring No 4.00 (101.6mm) X 3.90 (99.1mm) X #8-32 Stud Boxed None YesA/A
0300175-3-000B-02-01-02-02-16005.01-1-0-1-0-01-1-00-023103-01 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH501,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-02-01-02-02-16005.01-1-0-1-0-01-1-00-116268-01 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH501,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-02-01-02-02-16005.02-1-0-1-0-01-1-00-023103-02 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH502,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-02-01-02-02-16005.02-1-0-1-0-01-1-00-116268-02 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH502,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-02-01-02-02-16005.08-1-0-1-0-01-1-00-023103-03 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH508,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-000B-02-01-02-02-16005.08-1-0-1-0-01-1-00-116268-08 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH508,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-02-01-02-02-16005.08-1-0-1-0-02-1-00-023104-01 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH508,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed None NoA/A
0300175-3-000B-02-01-02-02-16005.08-1-0-1-0-02-1-00-116399-02 Non-Handed Stainless Steel, Buffed Small Round Head No finish, overmold, or cap TriMark logo Non-master keyed/keyed alike LOCK,CAM,SS,KS800,CH508,OFS,.755 Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed None Yes A/CP
0300175-3-000B-02-03-02-02-14075.01-1-0-1-1-01-1-00-112912-15 Non-Handed Stainless Steel, Buffed Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS800,CH501,1 KEY Yes NA 1 key Yes 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None YesA/A
0300175-3-000B-02-03-02-02-14075.08-1-0-1-0-02-1-00-129061-01 Non-Handed Stainless Steel, Buffed Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS800,CH508,1 KEY Yes NA 1 key No 4.00 (101.6mm) X 3.90 (99.1mm) X .212 (5.4mm) Square Holes Boxed None YesA/A
0300175-3-000B-02-03-02-02-14075.08-1-0-1-1-01-1-00-023100-01 Non-Handed Stainless Steel, Buffed Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS800,CH508,1 KEY Yes NA 1 key Yes 4.00 (101.6mm) X 3.90 (99.1mm) X .218 (5.5mm) Diameter Holes Boxed None NoA/A
0300175-3-015-00-00-00-00-0-0-0-0-0-00-1-00-022477-02 Non-Handed Zinc Plate/Clear Chromate No key No key No key Non-locking or N/A NA No NA 0 keys No No Mounting Boxed None NoA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale