050-0214 Slimline Latch With Inline Trip Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an inline trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

Designed For

  • Thinner, light or medium weight door applications requiring resistance to dust and vibration
  • Door weights up to 75 lbs. (34 kg)
  • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
  • Visible surface installation or concealed installation
  • Applications where it is desireable to have the release mechanism in line with the latch

Available

  • Left or right hand configurations
  • With standard .265 (6.7mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles

Material

  • Internal latch components: heat treated smooth edge stamped steel
  • Springs: non-corrosive stainless steel
  • Case halves: high strength steel

Installation

  • Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
  • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt

Internal Lubrication

  • Oven-cured dry lubricant is applied on all critical moving parts
  • Additional lubrication to be applied in the field if required

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0214 Slimline Latch With Inline Trip Single-Position

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods


  • Construction - Heavy Earthmoving

    Access Panels


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Replicars / Kit Cars

    Engine Compartments / Hoods


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:

 

  • Handing :

 

  • Axles :

 

  • Actuation :

 

  • Actuation Feature :

 

  • Finish :

CompareCatalog NumberTriMark NumberHandingAxlesActuationActuation FeatureFinishStatus CodeSample RequestCAD Drawing
0500214-1-01-13847-2-01534609-01 Right Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
0500214-1-01-13847-2-11034609-02 Right Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
0500214-1-06-13846-2-01537805-01 Right Hand M6 X 1.0 Threaded Axles Straight, Left Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
0500214-1-06-13847-2-11020119-02 Right Hand M6 X 1.0 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
0500214-2-01-13846-2-01534608-01 Left Hand 1/4-20 Threaded Axles Straight, Left Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
0500214-2-01-13847-2-11034608-02 Left Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
0500214-2-06-13846-2-11020109-02 Left Hand M6 X 1.0 Threaded Axles Straight, Left Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
0500214-2-06-13847-2-01537796-01 Left Hand M6 X 1.0 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
0500214-2-06-20515-1-01520514-01 Left Hand M6 X 1.0 Threaded Axles L-Shaped Finger Release, Left Handed, 2.00 X 2.18 (50.9mm X 55.4mm) Torsion Spring Zinc plate/clear chromateA/A
0500214-2-06-20741-1-01520435-01 Left Hand M6 X 1.0 Threaded Axles L-Shaped Finger Release, Left Handed, 4.47 X .86 (113.5mm X 21.9mm) Form Torsion Spring Zinc plate/clear chromateA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale