Designed For

• Motor homes and fifth-wheel trailers that require an exterior paddle handle and "state-of-the-art" Passive Keyless Entry
• Motor home entrance doors with thickness of 1.500" (38.1mm), 1.614" (41mm) or 1.812" (46mm)
• Door seal pressures of 25 lbs. (11 kg) or less for ease of function and maximum life (not to exceed 50 lbs. (23 kg)
• Right hand applications
• Door weights up to 75 lbs. (34 kg)

Features/Benefits

• Extends the product rage of TriMark's 030-0900 MH Entrance Door Handle with integrated Capacitive Sensor PCB into the base of the handle
• Passive Keyless Entry (PKE) provides for "hands free" unlocking
• When the users hand enters the handle field under the handle portion, the system wakes 
• This activity energizes the extrior antenna, FOBs in range will respond with their serial numbers in a data packet sent via 433 MHz 
• If the FOBs respond with serial numbers that match an authorized list, the control module will pulse the unlock motor for 1/2 second to unlock the handle


• Best in class features, flexibility and performance all in one package allowing fewer system configurations
• Maintains lock cylinder for mechanical override in case of power disruption
• TriMark KeyOne Plus for "One Key - One Vehicle" convenience
• Paddle is rigid when locked
• Deadbolt locks into the fully extended position for true deadbolt functioning

Available

• 550-0100 Powerlock actuator is available for integration into customer door with OEM provided bracket
• Sandwich mounting is available for door thicknesses of 1.500" (38.1mm), 1.614" (41mm) or 1.812" (46mm)
• Standard Deutsch sealed connector - 8 pin socket plug (connector customizations are available)
• Lock can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike
• Master keyed passage lock key cylinder/non-master keyed deadbolt


• Standard or extended length deadbolt
• Exterior gasket is available (not included)

Material

• Housing, inside plates, paddles, and certain lock actuating components: Die cast zinc alloy
• Potted (polyurethane resin) PCB board ensures environmental protection and durability
• Internal latch components: Heat treated, smooth edge stamped steel
• Springs: Non-corrosive stainless steel
• Case halves: High strength steel

Finish

• Black powder coated
• Chrome plated
• Interior release: Low gloss black or white powder coat

Installation

• #8-32 UNC mounting screws (not included). Recommended torque 13 in./lbs. (1.4 N-m)
• Sandwich mount installation does not require any linkage rods