050-0103 Two Rotor Latch Two Position Intertrip

This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway compartments and access panels. It features an internal trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch.

DESIGNED FOR:

  • Medium to heavy weight doors for on or off-highway applications
  • Door thicknesses of 1-7/8" or greater (47.6mm)
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressures of 50-150 lbs. (23-68 kg)(suggested for best results)
  • Visible surface installation or concealed inside installation
  • Applications where it is desirable to have the release mechanism in-line with the latch

AVAILABLE:

  • In left or right hand configurations
  • With (4) 1/4-20 UNC, M6 x 1 threaded axles
  • With trip lever options

FINISH:

  • Zinc plated, clear chromate steel components

MATERIAL:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

INSTALLATION:
  • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included).
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1 mm)

INTERNAL LUBRICATION:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts

NOTE: Two position, double rotor latches comply with FMVSS 206 (ECE R11) in primary and secondary latching positions when installed as shown below and tested with approved TriMark FMVSS 206 (ECE R11) compliant striker bolts in accordance with SAE J839.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0103 Two Rotor Latch Two Position Intertrip

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes


  • Replicars / Kit Cars

    Engine Compartments / Hoods


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:

 

  • Handing :

 

  • Mounting :

 

  • Actuation :

 

  • External Actuation :

 

  • Catch Spring :

 

  • Internal Trip Lever Spring :

CompareCatalog NumberTriMark NumberHandingMountingActuationExternal ActuationCatch SpringInternal Trip Lever SpringStatus CodeSample RequestCAD Drawing
0500103-101-11562-00000-010020528-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 1/4-20 None Normal Duty Catch Spring NoneA/A
0500103-101-21906-00000-010117704-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release L-Shaped, Right Hand Actuator, .41 X 1.28 X .51 (10.3mm X 32.5mm X 13.0mm) Form, No Holes None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-101-21908-00000-010118136-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 2.15 X 1.00 (54.6mm X 25.4mm) Form None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-101-23625-00000-010123626-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 1.79 X 1.28 (45.5mm X 32.5mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-101-24909-00000-010124910-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 1.29 X .41 (32.8mm X 10.4mm), Form, Hole None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-101-81110-00000-010014800-01 Right Hand 1/4-20 UNC Threaded Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Normal Duty Catch Spring NoneA/A
0500103-102-12567-00000-010012611-01 Right Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 6mm None Normal Duty Catch Spring NoneA/A
0500103-102-34333-00000-010134326-01 Right Hand .286 (7.3mm) Through Axles Direct Release L-Shaped, Non Hand/None, 1.12 X .75 (28.4mm X 19.1mm) .265 Dia Hole None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-102-80031-00000-010013899-01 Right Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Normal Duty Catch Spring NoneA/A
0500103-102-81069-00000-010011551-16 Right Hand .286 (7.3mm) Through Axles Direct Release-Straight, Right Hand Actuator, 1.73 X .28 (44.0mm X 7.0mm) X 36 Degree Form, No Holes None Normal Duty Catch Spring NoneA/A
0500103-102-81110-00000-020022044-01 Right Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Heavy Duty Catch Spring NoneA/A
0500103-102-81931-00000-010012563-16 Right Hand .286 (7.3mm) Through Axles Direct Release-Straight, Right Hand Actuator, 4.79 X 2.00 X .24 Dia (121.7mm X 50.8mm X 6.1mm) Form, Slot None Normal Duty Catch Spring NoneA/A
0500103-106-12567-00000-010015276-01 Right Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 6mm None Normal Duty Catch Spring NoneA/A
0500103-106-19455-00000-020019606-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 5.91 X .92 (105.1mm X 23.4mm) Form, No Holes, Vinyl Dip None Heavy Duty Catch Spring NoneA/A
0500103-106-20836-00000-010020578-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 1.64 X .24 (41.7 X 6.1) Catch None Normal Duty Catch Spring NoneA/A
0500103-106-20836-20832-010020833-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 1.64 X .24 (41.7 X 6.1) Catch Right Hand, 1.24 X .27 X .20 Dia Hole (31.5 X 6.9 X 5.1) Spring Hole, Form Normal Duty Catch Spring NoneA/A
0500103-106-20836-80737-010033012-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 1.64 X .24 (41.7 X 6.1) Catch Curved, Right Hand, Dia .250 Hole Normal Duty Catch Spring NoneA/A
0500103-106-20987-00000-010320278-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 2.22 X 2.43 (56.4mm X 61.7mm) None Normal Duty Catch Spring High Stress Internal Trip Lever SpringA/A
0500103-106-21895-00000-010120110-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21895-00000-0101 .20414498-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21895-00000-0101 .25714498-02 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21895-00000-0101 .26514498-04 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21895-00000-0101 .265 w/RC14498-03 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21906-00000-010120360-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, .41 X 1.28 X .51 (10.3mm X 32.5mm X 13.0mm) Form, No Holes None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21912-00000-010119586-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 2.02 X 1.78 (51.3mm X 45.2mm) Form, Vinyl Dip None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21913-20328-010122835-02 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21914-20328-010122833-02 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .69 X 2.02 X .19 Dim Slot (17.5mm X 51.3mm X 4.8mm) Form, Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21914-20328-0101b21956-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .69 X 2.02 X .19 Dim Slot (17.5mm X 51.3mm X 4.8mm) Form, Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-21914-31511-010131512-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .69 X 2.02 X .19 Dim Slot (17.5mm X 51.3mm X 4.8mm) Form, Slot L-Shaped, Non-Handed, .34 X 1.04 X .30 Dia Hole (8.6mm X 26.4mm X 7.6mm) Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-22200-22199-010121866-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 1.81 X 1.30 (46.0 X 32.9) Form, Slot Straight, Non Handed, 1.35 X .14 X .21 Dia Hole (34.35mm X 3.43mm X 5.22mm) Spring Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-23500-00000-010123501-01 Right Hand M6 X 1.0 Threaded Axles Direct Release-L-Shaped, Non-Handed/None, 1.12 X .80 (28.4mm X 20.3mm), hole None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-25694-25706-020125707-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 0.00 X 1.02 (00.0mm X 26.0mm), Hole Finger Release, .67 X 1.77 (17.0 X 45.0) Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-28252-30425-010128251-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 1.83 X .2 (46.5 X 5.1), Form Straight, Non-handed, 1.46 (37mm) Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-28260-00000-020128258-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 1.88 X 1.20 (47.8 X 30.6) Form, Slot None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-28262-00000-020128261-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 1.88 X 1.20 (47.8 X 30.6) Form, Slot None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-29604-00000-010029603-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non Handed/None 1.71 X 1.63 (43.4mm X 41.4mm) Catch None Normal Duty Catch Spring NoneA/A
0500103-106-32824-20328-010133167-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 71.6mm X 31.5mm form, 9.7mm X 15mm Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-33566-00000-020133565-01 Right Hand M6 X 1.0 Threaded Axles Direct Release Right Hand Actuator, Knob, 9.4 mm x 16.5 mm Slot None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-106-80631-00000-010021367-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non Handed/None 1.97 X .43 (50.0mm X 10.8mm) Catch None Normal Duty Catch Spring NoneA/A
0500103-106-81110-00000-020014701-01 Right Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Heavy Duty Catch Spring NoneA/A
0500103-201-11562-00000-010012319-16 Left Hand 1/4-20 UNC Threaded Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 1/4-20 None Normal Duty Catch Spring NoneA/A
0500103-201-14485-00000-010014486-02 Left Hand 1/4-20 UNC Threaded Axles Direct Release-Straight, Non-Handed/None, 1.56 X .19 (39.6mm X 4.8mm), Vinyl Dip None Normal Duty Catch Spring NoneA/A
0500103-201-21907-00000-010114221-01 Left Hand 1/4-20 UNC Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .41 X 1.28 X .51 (10.3mm X 32.52mm X 12.9mm) Form, No Holes None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-201-81110-00000-010013166-01 Left Hand 1/4-20 UNC Threaded Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Normal Duty Catch Spring NoneA/A
0500103-202-12567-00000-010012568-16 Left Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 6mm None Normal Duty Catch Spring NoneA/A
0500103-202-14485-00000-010020919-01 Left Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.56 X .19 (39.6mm X 4.8mm), Vinyl Dip None Normal Duty Catch Spring NoneA/A
0500103-202-81110-00000-010011554-16 Left Hand .286 (7.3mm) Through Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Normal Duty Catch Spring NoneA/A
0500103-206-11562-00000-020013930-01 Left Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 1/4-20 None Heavy Duty Catch Spring NoneA/A
0500103-206-12567-00000-010013686-01 Left Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 6mm None Normal Duty Catch Spring NoneA/A
0500103-206-17862-00000-020117864-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .41 X 2.28 X .59 (10.3mm X 57.9mm X 15.0mm) Form, No Holes None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-20836-20837-010020834-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 1.64 X .24 (41.7 X 6.1) Catch Left Hand, 1.24 X .27 X .20 Dia Hole (31.5 X 6.9 X 5.1) Spring Hole, Form Normal Duty Catch Spring NoneA/A
0500103-206-20836-80736-010033210-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 1.64 X .24 (41.7 X 6.1) Catch Curved, Left Hand, Dia .250 Hole Normal Duty Catch Spring NoneA/A
0500103-206-21896-00000-0101 .20414499-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21896-00000-0101 .25714499-03 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21896-00000-0101 .26514499-02 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Nose, 1.12 X .75 (28.4mm X 19.1mm) None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21897-00000-020120130-01 Left Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Right Hand Actuator, 2.28 X .38 (57.9mm X 9.7mm) Form, Hole, Vinyl Dip None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21897-00000-0201 w/vinyl20130-02 Left Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Right Hand Actuator, 2.28 X .38 (57.9mm X 9.7mm) Form, Hole, Vinyl Dip None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21906-20328-0101b22834-02 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21910-00000-010119122-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 2.98 X 2.02 (75.7mm X 51.3mm), Form None Normal Duty Catch Spring NoneA/A
0500103-206-21911-00000-010119585-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 2.02 X 1.78 (51.3mm X 45.2mm) Form, Vinyl Dip None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21913-00000-010124126-01 Right Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, Slot Direct Release L-Shaped, Right Handed, .48 X 2.17 X .16 Dia Hole (12.1mm X 55.0mm X 4.1mm) Hole, Form Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-21915-20328-010121476-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Right Hand Actuator, 2.82 X 1.24 (71.6mm X 31.5mm), Form, Slot Direct Release L-Shaped, Non Handed/None, 2.19 X .47 (55.6mm X 11.9mm) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-23500-00000-010123502-01 Left Hand M6 X 1.0 Threaded Axles Direct Release-L-Shaped, Non-Handed/None, 1.12 X .80 (28.4mm X 20.3mm), hole None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-25694-25706-020125708-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non-Handed/None, 0.00 X 1.02 (00.0mm X 26.0mm), Hole Finger Release, .67 X 1.77 (17.0 X 45.0) Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-33429-00000-020133564-01 Left Hand M6 X 1.0 Threaded Axles Direct Release Left Hand Actuator, Knob, 9.4 mm x 16.5 mm Slot None Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-34684-00000-010134683-01 Left Hand M6 X 1.0 Threaded Axles Direct Release L-Shaped, Non Hand/None, 69.5mm X 66.5mm 2 X 3.3 Dia Hole None Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500103-206-81110-00000-010016762-01 Left Hand M6 X 1.0 Threaded Axles Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes None Normal Duty Catch Spring NoneA/A
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale