030-2650 Motor Home Entrance Door Hardware-Rotary

Designed for motor home and fifth wheel trailer entrance doors, this new product is a redesign of our 030-1000/030-1050 Motor Home Entrance Door Hardware. It features easy installation with sandwich mounting, a reliable direct release rotary latch which is compliant to FMVSS 206 (ECE R11), a built-in deadbolt for additional security and is power lockable.

NOTE: Used with 060-1625 Inside release (refer to 060-1625 / 060-1650 Motor Home Entrance Door Hardware)

Designed For

  • Motor home entrance doors with thickness of 1.39" (35.3mm) to 1.78" (45.2mm) (Different inside plates are required to facilitate range of door thickness. Please identify when inquiring.)
  • Fifth-wheel trailers, pull-type trailers, and slide-in campers
  • Door seal pressures of 40 lbs. or less for ease of function and maximum life 
  • Right hand applications
  • Door requiring resistance to water and dirt infiltration
  • Use with TriMark 070-0100 Striker Bolt


  • Inside release is low profile .940"(23.9mm) to allow for close-fitting screen doors
  • Paddle can be locked before door is shut
  • Paddle is rigid when locked
  • Automotive styling
  • Comfortable finger access
  • Inside assist with open bail for easy closing
  • Can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Built-in deadbolt eliminates the need for add-on residential type deadbolt (deadbolt option)
  • Deadbolt locks into the fully extended position for true deadbolt functioning (deadbolt option)
  • Ability to be used with power actuation for locking (deadbolt option)
  • Deadbolt cylinder non-removable when locked for added security


  • With optional built-in deadbolt
  • Master keyed paddle key cylinder
  • Without key cylinders for matching entire vehicle cylinders after installation


  • Housing, inside plates, handles, plunger bolt, deadbolt, locking components including lock knobs: Die cast zinc alloy


  • Black powder coated
  • Copper-nickel-chrome plated 
  • Other finishes available upon request 


  • (3) #10-24 UNC mounting screws (not included). Recommended torque 10 in-lbs (1.1 N-m)
  • Supplied with gaskets already installed
  • Sandwich mount installation does not require any linkage rods
  • Power actuators, power actuation mounting brackets and rods are available for optional power actuation of locks. Please inquire.

U.S. Patent No. 8,733,139

U.S. Design Patent No. D674,678 / D676,304

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this system may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this system meets FMVSS 206 (ECE R11) loads and locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-2650 Motor Home Entrance Door Hardware-Rotary

  • Motor Homes

    Exterior Personnel Doors

    Interior Personnel Doors

  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Personnel Doors

    Interior Personnel Doors

  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors

    Interior Personnel Doors

Please specify search criteria:

CompareCatalog NumberTriMark NumberDescriptionHandingFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)DeadboltStatus CodeSample RequestCAD Drawing
0302650-1-3-008-99-03-02-06-16014.14.1000-16014.25.2000-1-0-4-129410-02 Exterior Paddle Non-Handed Volkswagon White Mix of Key Head Types Black overmold TriMark logo Mixed master/non master keyed, keyed random Yes NA 4 keys on ring Standard DeadboltA/A
0302650-1-3-008-99-03-02-06-16014.14.1000-16014.25.2000-1-0-4-229410-03 Exterior Paddle Non-Handed Volkswagon White Mix of Key Head Types Black overmold TriMark logo Mixed master/non master keyed, keyed random Yes NA 4 keys on ring Long DeadboltA/A
0302650-1-3-037-99-03-02-06-16014.14.1000-16014.25.2000-1-0-4-129410-01 Exterior Paddle Non-Handed Low Gloss Black Mix of Key Head Types Black overmold TriMark logo Mixed master/non master keyed, keyed random Yes NA 4 keys on ring Standard DeadboltA/A
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale