050-0600 Single Rotor Compartment Latch

This latch is intended for storage and compartment doors for off-road vehicles including agricultural and construction equipment. The robust construction and compact size at a very cost effective price make it a great choice for light to medium duty compartment door applications.

Designed For

  • Light to medium duty compartment doors, access panels and hoods for off-highway vehicle applications
  • Applications where it is desirable to have a single rotor latch that offers robust construction and compact size for a very cost effective price

Features/Benefits

  • Compact size
  • Use with 12mm diameter striker or standard bar stock
  • Mounts with (2) M8 x 1.25 fasteners (not included)
  • Threaded axle version provides ease of installation

Available

  • Right or left hand configurations (left hand shown)
  • Single or two position rotary style latching function
  • Several standard release actuators are available

Installation

  • Installed with (2) M8 x 1.25 bolts (not included)
  • Tighten to the manufacturers' recommended torque value, however, do not exceed 22.2 N-m (180 in-lbs) 

Finish

  • Zinc plated, clear chromate steel components

Material

  • Case and actuator: High strength steel
  • Springs: Non-corrosive stainless steel

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0600 Single Rotor Compartment Latch

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes

    Topper / Tonneau


  • Power Sports

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:

 

  • Handing :

 

  • Mounting :

 

  • Actuation :

 

  • State Sensing_Latch :

 

  • Rotors :

 

  • Finish :

 

  • QR Code/Packaging :

CompareCatalog NumberTriMark NumberHandingMountingActuationState Sensing_LatchRotorsFinishQR Code/PackagingStatus CodeSample RequestCAD Drawing
0500600-1-03-19248-00-2-015-0124617-01 Right Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 28.0 X 25.0, 2 Holes None Two Position Zinc Clear Chromate Standard BoxA/A
0500600-1-03-20268-00-1-015-0122355-01 Right Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Non-Handed, 33.0 X 60.0, No Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-1-03-21342-00-1-015-0121349-01 Right Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Right Hand Actuator, 52.0, 3.5 X 37.5, 83.9 Form, 2 Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-1-03-22727-00-1-015-0122741-01 Right Hand .330 (8.4mm) Diameter Through Axles Direct Release T-Shaped, Right Hand, 48.4, 59.4 X 3.5, 2 Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-19248-00-1-015-0120722-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 28.0 X 25.0, 2 Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-19248-00-2-015-0119244-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 28.0 X 25.0, 2 Holes None Two Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-19251-00-1-015-0120723-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Left Hand Actuator, 19.5 X 53.1, No Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-19251-00-1-110-0631007-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Left Hand Actuator, 19.5 X 53.1, No Holes None Single Position Magnicoat Silver A/A
0500600-2-03-19251-00-2-015-0119247-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Left Hand Actuator, 19.5 X 53.1, No Holes None Two Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-20268-00-1-015-0120724-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Non-Handed, 33.0 X 60.0, No Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-20268-00-2-015-0120269-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release L-Shaped, Non-Handed, 33.0 X 60.0, No Holes None Two Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-20474-00-1-015-0120725-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 43.0 X 3.5, 2 Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-20474-00-2-015-0120473-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 43.0 X 3.5, 2 Holes None Two Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-22725-00-1-015-0122742-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release T-Shaped, Left Hand, 48.4, 59.4 X 3.5, 2 Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-03-24124-00-1-015-0124954-01 Left Hand .330 (8.4mm) Diameter Through Axles Direct Release-Straight, Non-Handed, 31.6 X 256.2 None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-08-20268-00-1-015-0134742-01 Left Hand M8 x 1.25 Threaded Axles Direct Release L-Shaped, Non-Handed, 33.0 X 60.0, No Holes None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-08-20474-00-3-015-0134276-01 Left Hand M8 x 1.25 Threaded Axles Direct Release-Straight, Non-Handed, 43.0 X 3.5, 2 Holes None Single Position Heat Treated Zinc Clear Chromate Standard BoxA/A
0500600-2-08-28533-00-1-015-0128539-01 Left Hand M8 x 1.25 Threaded Axles Direct Release Finger, Left Hand, 3.22 X 1.83, Dipped None Single Position Zinc Clear Chromate Standard BoxA/A
0500600-2-08-30985-00-1-110-0130986-01 Left Hand M8 x 1.25 Threaded Axles L-Shaped, Non-Handed, 1.20 X 2.41 X .21 Dia Hole (30.5mm X 61.3mm X 5.4mm), Spring Hole None Single Position Magnicoat Silver Standard BoxA/A
0500600-2-08-32963-00-2-015-0133005-01 Left Hand M8 x 1.25 Threaded Axles Direct Release L-Shaped, Left Hand Actuator, 23.0 X 53.1 X 35.0, No Holes None Two Position Zinc Clear Chromate Standard BoxA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale