050-5320 9毫米单转子闩锁

This compact single rotor latch is designed for use on light to medium duty operator and compartment doors for off-highway applications. It features a direct catch to facilitate a remote exterior handle and has an integrated direct inside release that provides for ease of mounting and applications.

这款单转子闩锁闩锁专为轻到中型非公路车辆的人员进出门、隔间门而设计,远程解锁外把手和内释放把手,使安装和应用更简单.

DESIGNED FOR:
  • Operator and compartment access door applications for off-highway vehicles
  • Doors requiring latch location remote from actuating handle
  • Light to medium duty doors up to 25 kg (55 lbs.) with door seal pressure no greater than 20 kg (44 lbs.)

设计应用:

  • 非公路车辆的人员进出门、隔间门
  • 需要配置远程开启把手的车厢门
  • 重量不超过25 kg55 lbs)的轻型至中型门,门密封压力不超过20 kg44 lbs 

FEATURES/BENEFITS:
  • Compact size and shape: allows maximum visibility and use of door space
  • Black finish reduces the need for secondary painting or covers
  • Two position rotary style latching function

特性/优点:

  • 外形尺寸紧凑,使门的可视空间和可利用空间最大化
  • 黑色饰面,无需二次喷涂
  • 二档可旋转闭锁功能 


AVAILABLE:
  • Right hand version as shown
  • Standard M6 x 1.0 threaded axles for 8.5mm (.355" diameter) through axles
  • Use with 9mm diameter striker or standard bar stock

现有功能:

  • 图示为右手型
  • 标准M6 x 1.0螺纹轴或8.5毫米(.335英寸直径)通轴
  • 与直径9mm的撞针或标准件配套使用 

MATERIAL:
  • Rotor and Catch: Heat treated steel
  • Case Halves: High strength steel
  • Spring: Non-corrosive stainless steel
  • Inside release knob: black plastic

材料:

  • 转子和擒纵板:热处理钢
  • 前后盖板:高强度钢
  • 弹簧:不锈钢
  • 内部释放旋钮:黑色塑料 

FINISH:
  • Zinc plated steel components with black finish

表面处理:

  • 电镀黑锌钢部件 

INSTALLATION:
  • (2) M6 x 1.0 threaded axle; provides ease of installation (Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 13.6 N-m) 120 in-lbs.)

安装:

  • (2)使用 M6 x 1.0螺纹轴;安装方便(拧紧至紧固件制造商推荐的扭矩值,但不得超过13.6 牛米(120 磅) 

USE WITH:
  • TriMark's 030-5100 Remote Paddle Handle
  • TriMark's 070-5500 9mm Hoop Strike

配套使用:

  • 030-5100  远程释放翻版把手
  • 特利马克070-5500 9毫米撞环


CAUTION: Latch does not meet the  load requirements for FMVSS 206 (ECE R11).

 注意:闩锁不符合FMVSS206ECE R11)的载荷要求.

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

050-5320 9毫米单转子闩锁

请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale