• Home
  • Products
  • Europe Distribution Parts

050-0100 Two-Rotor Latch

Designed For:

  • Medium to heavy weight doors for on or off-highway applications
  • Door thicknesses of 1-7/8" (47.6mm) or greater
  • Door weights of 50-200 lbs. (23-91kg)
  • Door seal pressures of 50-150 lbs. (23-68kg) (suggested for best results)

Material:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel springs

Finish:

  • Zinc plated, yellow chromate steel components

Installation:

  • Four M6 X 1 grade 8.8-type fasteners are required (not included). Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
  • Fastener mounting hole diameter should not exceed .281" (7.1mm)

Internal Lubrication:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts

Use With:

Part Number Handing Mounting Actuation Actuation Feature Actuation Support SKU Number
11450-16 Right hand 0.286" (7.25mm) diameter through axles Conventional L-shaped, non-handed, v01-0.887 X 1.872 (22.5mm X 47.5mm),spring hole No actuation feature Standard mount 0500100-102-30014-01
11449-16 Left hand 0.286" (7.25mm) diameter through axles Conventional L-shaped, non-handed, .887 X 1.872 (22.5mm X 47.5mm), spring hold No actuation feature Standard mount 0500100-202-30014-01
16297-01 Left hand M6 X 1.0 Conventional L-shaped, LH actuator, 2.000 X 1.281 X .188 (50.8mm X 32.5mm X 4.8mm) offset, slot Extension spring Standard mount 0500100-206-34026-21
16296-01 Right hand M6 X 1.0 Conventional L-shaped, RH actuator, 2.000 X 1.281 X .188 (50.8mm X 32.5mm X 4.8mm) offset, slot Extension spring Standard mount 050010-106-33036-21
12181-16 Left hand M6 X 1.0 Finger release-strt, Non-handed, 2.810 X 0 X .562 (71.4 X 0 X 14.3) form, No holes No actuation feature Standard mount 0500100-206-50011-01
12180-16 Right hand M6 X 1.0 Finger release-strt, Non-handed, 2.810 X 0 X .562 (71.4mm X 0 X 14.3mm) form, No holes No actuation feature Standard mount 0500100-106-50011-01
18610-01 Left hand M6 X 1.0 Conventional 2-pt., non-handed, 1.25, .625 X 1.083 (31.8mm X 15.9mm X 27.5mm),stop Torsion spring Standard mount 0500100-206-20010-01
18611-01 Right hand M6 X 1.0 Conventional 2-pt., non-handed, 1.25, .625 X 1.083 (31.8mm X 15.9mm X 27.5mm),stop Torsion spring Standard mount 0500100-206-20010-01
©2012 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale