• Home
  • Products
  • Europe Distribution Parts

050-0210 Slimline Rotary Latch Single Position


Designed For:

  • Thinner, light or medium weight door applications requiring resistance to dust and vibration
  • Door weights up to 75 lbs. (34kg)
  • Door seal pressures of 20-25 lbs. (9-11kg) recommended for best results (not to exceed 50 lbs - 23kg)
  • Visible surface or concealed installation
  • Applications where it is desireable to have the release mechanism in line with the latch

Material:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

Finish:

  • Zinc plated, yellow chromate steel components

Installation:

  • Three M6 X 1 class 8.8 or better fasteners are recommended
  • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

Internal Lubrication:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts
  • Additional lubrication to be applied in the field if required

Use With:

Part Number Handing Mounting Actuation Actuation Feature SKU Number
14953-02 Right hand M6 X 1.0 Conventional-straight, NH, 1.25 (31.8mm), stop None 0500210-106-10012-0
14953-02 Left hand M6 X 1.0 Conventional-straight, NH, 1.25 (31.8mm), stop None 0500210-106-10012-0
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale