050-0214 Slimline Latch With Inline Trip Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an inline trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

索取样品

Designed For

Thinner, light or medium weight door applications requiring resistance to dust and vibration
Door weights up to 75 lbs. (34 kg)
Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
Visible surface installation or concealed installation
Applications where it is desireable to have the release mechanism in line with the latch

Available

Left or right hand configurations
With standard .265 (6.7mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles

Material

Internal latch components: heat treated smooth edge stamped steel
Springs: non-corrosive stainless steel
Case halves: high strength steel

Installation

Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt

Internal Lubrication