Home
Products
Europe Distribution Parts

070-0100 .500" Diameter Striker Bolt

Designed for use with TriMark's single rotor latches and cage nuts that require a .500" diameter striker bolt

Material:

Typical materials include AISI 4140 and AISI C10B21 steel (or equivalent), heat treated to TriMark ES-141

Finish:

Zinc plated with yellow chromate

Installation:

Torque to 35 ft-lbs. minimum depending upon surface conditions

TriMark striker bolts are designed and tested to meet or exceed FMVSS 206 safety requirements only when used with TriMark's corresponding 206 compliant latches.

Use With:

TriMark 030-0175 Stamped Steel Compartment Latch
16268-13
TriMark 030-1300 D-Paddle Handle
14996-03
14817-01
TriMark 050-0200 Slimline Rotary Latch
11664-16
11665-16
TriMark 050-0204 Slimline Latch With Inline Trip Lever
13844-02
13845-02
TriMark 050-0210 Single Connection Slimline Rotary Latch
14953-02
14952-02
TriMark 050-0300 Single Rotor Latch
14382-01
TriMark 100-0410 Cage Nut
11920-16
12111-16

Installation:

Supplied either fully assembled or bagged with cam and nuts packaged loose
Removal of cam and 7/8-28 mounting is required for installation
IMPORTANT: Note maximum nut torque specifications on drawing

Part Number	Thread	Dimension	Washer	SKU Number
10335-16	3/8-16 UNC	.800 X 1.665 (20.3mm X 42.3mm)	.105 X 1.125 (2.7mm X 28.6mm)	0700100-301-1
81687-16	3/8-16 UNC	1.050 X 2.000 (26.7mm X 50.8mm)	None	0700100-705-0

©2022 TriMark Corporation. All rights reserved. Privacy • Legal Info • Terms and Conditions of Sale