• Home
  • Products
  • Europe Distribution Parts

070-0200 .675" Diameter Striker Bolt

  • Designed for use with TriMark's two-rotor latches and cage nuts

Material:

  • Typical materials include AISI 4140 and AISI C10B21 steel (or equivalent), heat treated to TriMark ES-141

Finish:

  • Zinc plated with yellow chromate

Installation:

  • Torque 7/16-14 UNC-2A and M12 X 1.75-6g to 56 ft-lbs (74.7 N-m) minimum depending upon surface conditions
  • Torque 1/2-13 UNC-2A to 85 ft-lbs (113.3 N-m) mimimum depending upon surface conditions
  • TriMark striker bolts are designed and tested to meet or exceed FMVSS 206 safety requirements only when used with TriMark's corresponding 206 compliant latches.

Use With:

Part Number Thread Dimension Washer SKU Number
11111-16 M12 X 1.75 1.000 X 1.732 (25.4mm X 44.0mm) .150 X 1.100 (3.8mm X 27.9mm) 0700200-608-2
81623-16 Striker guard for use with 11111-16
11737-16 M12 X 1.75 1.489 X 2.205 (37.8mm X 56.0mm) .150 X 1.100 (3.8mm X 27.9mm) 0700200-609-2
14270-01 M12 X 1.75 2.800 X 3.820 (71.1mm X 97.0mm) .150 X 1.100 (3.8mm X 27.9mm) 0700200-614-2
15506-01 M12 X 1.75 2.209 X 3.110 (56.1mm X 79.0mm) .150 X 1.100 (3.8mm X 27.9mm) 0700200-611-2
16912-01 M12 X 1.75 1.339 X 2.205 (34.0mm X 56.0mm) .150 X 1.100 (3.8mm X 27.9mm) 0700200-606-2
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale