070-0300 .375" (9.5mm) Diameter Striker Bolt

Designed as a companion part for use with TriMark's single rotor latches and cage nuts that requires a .375" (9.5mm) diameter striker bolt. It is available in a variety of lengths with several drive details and mounting thread choices.

Technical Publication

Material

Striker bolt: Medium carbon steel, heat treated
Washer: Mild steel

Finish

Striker bolt: Zinc plated with clear chromate
Washer: Galvanized zinc

Caution: Product does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Latch & Striker Installation

Install striker bolt in door frame
Close door carefully and check for interference between head of striker bolt and latch components
Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
Adjust striker bolt vertically so door is not guided upward or downward while being closed
CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
If both primary and secondary positions are not evident, readjust striker bolt
After installation, check door alignment and door seal pressures

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

070-0300 .375" (9.5mm) Diameter Striker Bolt

Please specify search criteria:

	Shoulder Diameter :
	Thread Size :
	Installed Length :
	Thread Length :
	Drive Detail Internal or External :
	Washer Dia. X Thickness :
	Striker Guard :

Compare	Catalog Number	TriMark Number	Shoulder Diameter	Thread Size	Installed Length	Thread Length	Drive Detail Internal or External	Washer Dia. X Thickness	Striker Guard	Status Code	CAD Drawing
	0700300-00-070-0000-01-00-0	19126-01	.360/.370	NA	0.70	NA	6mm Internal	NA	No	A/A
	0700300-05-107-0441-10-07-0	24851-01	0.373	5/16-18 UNC-2A	1.07	0.441	16mm External	1.10 X 0.11	No	A/A
	0700300-05-110-0402-02-06-0	15434-01	0.373	5/16-18 UNC-2A	1.10	0.402	0.187 Internal	1.00 X 0.10	No	A/A
	0700300-08-132-0538-03-04-0	20124-01	0.373	M8 X 1.25-6g	1.32	0.538	0.250 Internal	0.88 X 0.11	No	A/A
	0700300-08-132-0538-03-07-0	18700-01	0.373	M8 X 1.25-6g	1.32	0.538	0.250 Internal	1.10 X 0.11	No	A/A
	0700300-08-132-0543-02-07-0	24120-01	9.5mm	M8 X 1.25-6g	1.32	0.543	0.187 Internal	1.10 X 0.11	No	A/A