050-1910 8mm Single Rotor Latch - Single Position

TriMark's newest innovation in rotary latches features a robust modular design that offers extensive actuation locations and options providing application flexibility in a compact design. Designed for medium to heavy-duty applications for on or off-highway applications, this single position latch is designed for non FMVSS206 (ECE R11) configurations.

Designed For

  • Applications where it is desirable to have a single position rotary latch
  • Interior door thickness of 45-57mm (1.77-2.25 in.). Depending on the actuator type and location the overall height could be greater. Please contact TriMark for specific details.
  • Medium to heavy duty doors of 23-81 kg (50-175 lbs.) with maximum door seal pressure of 36 kg (80 lbs.)

Features/Benefits

  • Modular case construction is preconfigured with multiple actuation points on the front case allowing top/bottom actuation including stacked actuators as well as combinations of actuation points providing the most configurable rotary door latch ever offered
  • Compact size and shape allows maximum use of door space and minimizes visibility issues without compromising strength and robustness
  • Rotor provides for vertical clearance of strike allowing for door sag, misalignment and ease of installation
  • Single position version for compartment and door hold-open for non FMVSS 206 (ECE R11) applications
  • 8mm diameter automotive style hoop-type strike minimizes clothing snag hazard

Available

  • In left or right hand configurations (right hand shown)
  • Versions are available to allow direct actuation from exterior push button or pull handles and interior releases providing a simple, low cost and compact application
  • Platform allows for reuse of TriMark’s extensive selection of existing actuation levers reducing application engineering and tooling requirements
  • Several actuator return spring options
  • Coaxial actuator mechanism for applications where it is desirable to provide additional support to the actuation levers
  • Innovative barrel release for ease of use/installation
  • Future provisions for power release mechanisms and logic mechanism

Material

  • Case halves: High strength steel
  • Rotor and catch: Heat treated steel
  • Springs: Non-corrosive stainless steel

Finish

  • Zinc plated, clear chromate steel components

Installation

  • Easy to install, mounts with (2) M8 x 1.25 class 8.8 or better fasteners are required (not included)
  • Tighten to manufacturers' recommended torque value, however, do not exceed 26.0 N-m (230.1 in-lbs)

Use With

  • TriMark 070-1000 8mm Hoop Strike 
  • TriMark 070-1300 Adjustable Striker

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements. 

U.S. Patent Nos. 10,676,967 / 10,697,207

©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale