050-0214 Slimline Latch With Inline Trip Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an inline trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

    Designed For

    • Thinner, light or medium weight door applications requiring resistance to dust and vibration
    • Door weights up to 75 lbs. (34 kg)
    • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
    • Visible surface installation or concealed installation
    • Applications where it is desireable to have the release mechanism in line with the latch

    Available

    • Left or right hand configurations
    • With standard .265 (6.7mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles

    Material

    • Internal latch components: heat treated smooth edge stamped steel
    • Springs: non-corrosive stainless steel
    • Case halves: high strength steel

    Installation

    • Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
    • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt

    Internal Lubrication

    • Oven-cured dry lubricant is applied on all critical moving parts
    • Additional lubrication to be applied in the field if required

    Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

    ©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale