050-0103 Two Rotor Latch Two Position Intertrip

DESIGNED FOR:

Medium to heavy weight doors for on or off-highway applications
Door thicknesses of 1-7/8" or greater (47.6mm)
Door weights of 50-200 lbs. (23-91 kg)
Door seal pressures of 50-150 lbs. (23-68 kg)(suggested for best results)
Visible surface installation or concealed inside installation
Applications where it is desirable to have the release mechanism in-line with the latch

AVAILABLE:

In left or right hand configurations
With (4) 1/4-20 UNC, M6 x 1 threaded axles
With trip lever options

FINISH:

Zinc plated, clear chromate steel components

MATERIAL:

Internal latch components: heat treated, smooth edge stamped steel
Case halves: high strength steel
Springs: non-corrosive stainless steel

INSTALLATION:

(4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included).

Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)
Fastener mounting holes diameter should not exceed .281" (7.1 mm)

INTERNAL LUBRICATION:

Oven-cured dry lubricant is applied at factory on all critical moving parts

NOTE: Two position, double rotor latches comply with FMVSS 206 (ECE R11) in primary and secondary latching positions when installed as shown below and tested with approved TriMark FMVSS 206 (ECE R11) compliant striker bolts in accordance with SAE J839.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

	Handing :
	Mounting :
	Actuation :
	External Actuation :
	Catch Spring :
	Internal Trip Lever Spring :
	Latch Plate Cutouts :

Compare	Catalog Number	TriMark Number	Handing	Mounting	Actuation	External Actuation	Catch Spring	Internal Trip Lever Spring	Latch Plate Cutouts	Status Code	CAD Drawing
	0500103-1-01-1156216CTHD-0000000000-01-00-01	20528-01	Right Hand	1/4-20 UNC Threaded Axles	Threaded end on catch, Threaded 1/4-20 (11562-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-01-2083601CWPR-0000000000-01-01-15	34664-01	Right Hand	1/4-20 UNC Threaded Axles	Catch with post release (20836-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate end and catch post cutouts	A/A
	0500103-1-01-2190601LVRR-0000000000-01-01-08	17704-01	Right Hand	1/4-20 UNC Threaded Axles	Lever release (21906-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and small end cutouts	A/A
	0500103-1-01-2190801LVRR-0000000000-01-01-08	18136-01	Right Hand	1/4-20 UNC Threaded Axles	Lever release (21908-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and small end cutouts	A/A
	0500103-1-01-2362501LVRR-0000000000-01-01-08	23626-01	Right Hand	1/4-20 UNC Threaded Axles	Lever release (23625-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and small end cutouts	A/A
	0500103-1-01-2490901LVRR-0000000000-01-01-08	24910-01	Right Hand	1/4-20 UNC Threaded Axles	Lever release (24909-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and small end cutouts	A/A
	0500103-1-01-8111016CNTD-0000000000-01-00-03	14800-01	Right Hand	1/4-20 UNC Threaded Axles	Catch release (81110-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-1-02-1256716CTHD-0000000000-01-00-01	12611-01	Right Hand	.286 (7.3mm) Through Axles	Threaded end on catch, Threaded M6X1 (12567-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-02-3433301VLHL-0000000000-01-01-10	34326-01	Right Hand	.286 (7.3mm) Through Axles	Lever release, .265" (6.73mm) hole (34326-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-02-8106916CNTD-0000000000-01-00-03	11551-16	Right Hand	.286 (7.3mm) Through Axles	Catch release (81069-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-1-02-8111016CNTD-0000000000-01-00-03	13899-01	Right Hand	.286 (7.3mm) Through Axles	Catch release (81110-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-1-02-8111016CNTD-0000000000-02-00-03	22044-01	Right Hand	.286 (7.3mm) Through Axles	Catch release (81110-16)	None	Heavy Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-1-02-8193126CESR-0000000000-01-00-01	12563-16	Right Hand	.286 (7.3mm) Through Axles	Catch release with extension spring return (81931-26)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-06-1256716CTHD-0000000000-01-00-01	15276-01	Right Hand	M6 X 1.0 Threaded Axles	Threaded end on catch, Threaded M6X1 (12567-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-06-1945501CNTD-0000000000-02-00-01	19606-01	Right Hand	M6 X 1.0 Threaded Axles	Catch release (19445-01)	None	Heavy Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-06-2083601CWPR-0000000000-01-00-15	20578-01	Right Hand	M6 X 1.0 Threaded Axles	Catch with post release (20836-01)	None	Normal Duty Catch Spring	None	Back plate end and catch post cutouts	A/A
	0500103-1-06-2083601CWPR-2083201TTH-01-00-16	20833-01	Right Hand	M6 X 1.0 Threaded Axles	Catch with post release (20836-01)	External trip lever release with torsion spring, .204 (5.18mm) hole (20832-01)	Normal Duty Catch Spring	None	Back plate catch post cutout	A/A
	0500103-1-06-2083601CWPR-8073716TTS-01-00-16	33012-01	Right Hand	M6 X 1.0 Threaded Axles	Catch with post release (20836-01)	External trip lever with torsion spring, .26" (6.5mm) hole (80736-16)	Normal Duty Catch Spring	None	Back plate catch post cutout	A/A
	0500103-1-06-2098701LVR-0000000000-01-03-06	20278-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release (20987-01)	None	Normal Duty Catch Spring	High Stress Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2107301LVSL-3151101TLH-01-01-06	31512-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .150" (3.81mm)R/.225"(5.71mm)R X .600" (15.2mm) slot (21073-01)	External trip lever release, .295" (7.5mm) hole (31511-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2189501LVHL-0000000000-01-01-05	20110-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (14498-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge cutout	A/A
	0500103-1-06-2189501LVHL-0000000000-01-01-10	14498-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (14498-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-2190601LVRR-0000000000-01-01-08	20360-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release (21906-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and small end cutouts	A/A
	0500103-1-06-2191001LVRR-0000000000-01-00-13	19122-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release (21910-01)	None	Normal Duty Catch Spring	None	Back plate small edge cutout	A/A
	0500103-1-06-2191201LVRR-0000000000-01-01-06	19586-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release (21912-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2191301LVSL-2412501TLH-01-01-13	24126-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21913-01)	External trip lever release, .16" (4.1mm) hole (24125-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-1-06-2191401LVSL-2032801TRC-01-01-06	21956-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21914-01)	External trip lever release, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2191401LVSL-2032801WRC-01-01-06	22833-02	Right Hand	M6 X 1.0 Threaded Axles	Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21914-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2191901LVSL-2032801TRC-01-01-13	22835-02	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21919-01)	External trip lever release, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-1-06-2220001LVSL-2219901TTH-01-01-06	21866-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .37" (9.4mm) X .53" (13.5mm) slot (22200-01)	External trip lever release with torsion spring, .206" (5.22mm) hole (22199-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2220001LVSL-3151101TLH-01-02-06	35049-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .37" (9.4mm) X .53" (13.5mm) slot (22200-01)	External trip lever release, .295" (7.5mm) hole (31511-01)	Normal Duty Catch Spring	Heavy Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2350001LVHL-0000000000-01-01-10	23501-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (23500-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-2350001LVHL-0000000000-02-01-10	23501-02	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (23500-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-2569401LVHL-2570601CTR-02-01-06	25707-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .210" (5.35mm) hole (25694-01)	Center release (25706-01)	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-2826201LVSL-0000000000-02-01-12	28261-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .37" (9.4mm) X .53" (13.5mm) slot (28262-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge and small end cutouts	A/A
	0500103-1-06-2960401CNTD-0000000000-01-00-01	29603-01	Right Hand	M6 X 1.0 Threaded Axles	Catch release (29604-01)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-1-06-3016801TLTS-3016901TLH-01-01-06	38164-01	Right Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release with torsion spring return (30168-01)	External trip lever release, .24" (6mm) hole (30169-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-30425.01TLES-3042501TLH-01-01-06	28251-01	Right Hand	M6 X 1.0 Threaded Axles	Lever/ trip lever release with extension spring return, .239" (6.07mm) hole (30425-01)	External trip lever release, .239" (6.07mm) hole (30425-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-3282401LVSL-2032801WRC-01-01-06	33167-01	Right Hand	M6 X 1.0 Threaded Axles	Release lever, .38" (9.6mm) X .59" (15mm) slot (32824-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-3356601LVSH-0000000000-02-01-12	33565-01	Right Hand	M6 X 1.0 Threaded Axles	Release lever, .37" (9.4mm) X .65" (16.5mm) slot, .200" (5.08mm) hole (33566-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge and small end cutouts	A/A
	0500103-1-06-3583801LVRR-3583901TLH-01-01-17	35837-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release (35838-01)	External trip lever release, .16" (4mm) hole (35839-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge and small end cutouts	A/A
	0500103-1-06-3583801LVRR-4026501ESK-01-01-21	40263-02	Right Hand	M6 X 1.0 Threaded Axles	Lever release (35838-01)	External trip lever release with extension spring, knob (40265-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout and back plate edge/corner cutouts	A/A
	0500103-1-06-3611701TLRC-1128016TTH-01-01-06	36054-01	Right Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (36117-01)	External trip lever release with torsion spring, .238" (6.04mm) hole (11280-16)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-3683001LVHL-0000000000-01-01-10	14498-02	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .257" (6.53mm) hole (36830-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-37026.01RCLR -0000000000-01-01-10	14498-03	Right Hand	M6 X 1.0 Threaded Axles	Lever release, with rod collar, .265" (6.73mm) hole (37026-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-3702601LVHL-0000000000-01-01-10	14498-04	Right Hand	M6 X 1.0 Threaded Axles	Lever release, with rod collar, .265" (6.73mm) hole (37026-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-5017401LVHL-0000000000-01-01-10	50175-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (50174-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-1-06-5075801RCLR-5075701ESK-01-01-06	50756-01	Right Hand	M6 X 1.0 Threaded Axles	Lever release, with rod collar & torsion spring, .265" (6.73mm) hole (50750-01)	External trip lever release with extension spring, knob (50757-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-5144201TLRC-1128016TTH-01-00-06	51439-01	Right Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (51442-01)	External trip lever release with torsion spring, .238" (6.04mm) hole (11280-16)	Normal Duty Catch Spring	None	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-5144201TLRC-5208301TRC-01-01-06	52077-01	Right Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (51442-01)	External trip lever release, .169" (4.29mm) rod clip (52082-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-1-06-8063126CLCR-0000000000-01-00-14	21367-01	Right Hand	M6 X 1.0 Threaded Axles	Catch with release through latch cutout (80631-26)	None	Normal Duty Catch Spring	None	Back plate cutout on rotor edge	A/A
	0500103-1-06-8111016CNTD-0000000000-02-00-03	14701-01	Right Hand	M6 X 1.0 Threaded Axles	Catch release (81110-16)	None	Heavy Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-2-01-1156216CTHD-0000000000-01-00-01	12319-16	Left Hand	1/4-20 UNC Threaded Axles	Threaded end on catch, Threaded 1/4-20 (11562-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-2-01-1448501CNTD-0000000000-01-00-02	14486-02	Left Hand	1/4-20 UNC Threaded Axles	Catch release (14485-01)	None	Normal Duty Catch Spring	None	Front plate cutout on rotor edge	A/A
	0500103-2-01-2190701LVRR-0000000000-01-01-11	14221-01	Left Hand	1/4-20 UNC Threaded Axles	Lever release (21907-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small end cutout	A/A
	0500103-2-01-3756601CWHL-0000000000-02-00-03	37565-01	Left Hand	1/4-20 UNC Threaded Axles	Catch release, .21" (5.3mm) hole (37566-01)	None	Heavy Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-2-01-8111016CNTD-0000000000-01-00-03	13166-01	Left Hand	1/4-20 UNC Threaded Axles	Catch release (81110-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-2-02-1256716CTHD-0000000000-01-00-01	12568-16	Left Hand	.286 (7.3mm) Through Axles	Threaded end on catch, Threaded M6X1 (12567-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-2-02-1448501CNTD-0000000000-01-00-02	20919-01	Left Hand	.286 (7.3mm) Through Axles	Catch release (14485-01)	None	Normal Duty Catch Spring	None	Front plate cutout on rotor edge	A/A
	0500103-2-02-2189301LVRR-0000000000-01-01-13	50017-01	Left Hand	.286 (7.3mm) Through Axles	Lever release (21893-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-02-5008301LVRR-0000000000-01-01-13	50017-02	Left Hand	.286 (7.3mm) Through Axles	Lever release (50083-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-02-5053901LVRR-0000000000-01-01-13	50538-01	Left Hand	.286 (7.3mm) Through Axles	Lever release (50539-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-02-5073001LVWR-0000000000-01-01-13	50729-01	Left Hand	.286 (7.3mm) Through Axles	Lever release, with rod (50730-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-02-8111016CNTD-0000000000-01-00-03	11554-16	Left Hand	.286 (7.3mm) Through Axles	Catch release (81110-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A
	0500103-2-06-1156216CTHD-0000000000-02-00-01	13930-01	Left Hand	M6 X 1.0 Threaded Axles	Threaded end on catch, Threaded 1/4-20 (11562-16)	None	Heavy Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-2-06-1256716CTHD-0000000000-01-00-01	13686-01	Left Hand	M6 X 1.0 Threaded Axles	Threaded end on catch, Threaded M6X1 (12567-16)	None	Normal Duty Catch Spring	None	Front plate edge cutout	A/A
	0500103-2-06-1786201CWKB+2190201LVSL-0000000000-02-01-18	17864-01	Left Hand	M6 X 1.0 Threaded Axles	Catch release, with knob (17862-01); Lever release, .238" (6.05mm) X .300" (7.62mm) slot (21902-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate cutout on rotor edge + Back plate small edge cutout	A/A
	0500103-2-06-2083601CWPR-2083701TTH-01-00-16	20834-01	Left Hand	M6 X 1.0 Threaded Axles	Catch with post release (20836-01)	External trip lever release with torsion spring, .204 (5.18mm) hole (20837-01)	Normal Duty Catch Spring	None	Back plate catch post cutout	A/A
	0500103-2-06-2083601CWPR-8073616TTS-01-00-16	33210-01	Left Hand	M6 X 1.0 Threaded Axles	Catch with post release (20836-01)	External trip lever with torsion spring, .26" (6.5mm) hole (80736-16)	Normal Duty Catch Spring	None	Back plate catch post cutout	A/A
	0500103-2-06-2189601LVHL-0000000000-01-01-10	14499-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (21896-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-2-06-2189701LVRR-0000000000-02-01-11	20130-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release (21897-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small end cutout	A/A
	0500103-2-06-2189702LVRR-0000000000-02-01-11	20130-02	Left Hand	M6 X 1.0 Threaded Axles	Lever release (21897-02)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small end cutout	A/A
	0500103-2-06-2191101LVRR-0000000000-01-01-05	19585-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release (21911-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge cutout	A/A
	0500103-2-06-2191501LVSL-2032801WRC-01-01-06	21476-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21915-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-2191501LVSL-2032801WRC-02-02-06	35486-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21915-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Heavy Duty Catch Spring	Heavy Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-2191901LVSL-2032801WRC-01-01-13	22834-02	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21919-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-06-2191901LVSL-2032801WRC-02-02-13	35487-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21919-01)	External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01)	Heavy Duty Catch Spring	Heavy Duty Internal Trip Lever Spring	Back plate small edge cutout	A/A
	0500103-2-06-2350001LVHL-0000000000-01-01-10	23502-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .204" (5.18mm) hole (23500-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-2-06-2569401LVHL-2570601CTR-02-01-06	25708-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .210" (5.35mm) hole (25694-01)	Center release (25706-01)	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-2826001LVSL-0000000000-02-01-12	28258-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .37" (9.4mm) X .53" (13.5mm) slot (28260-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge and small end cutouts	A/A
	0500103-2-06-3016901TLTS-3016801TLH-01-01-06	38588-01	Left Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release with torsion spring return (30169-01)	External trip lever release, .237" (6.02mm) hole (30168-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-3274001TLT-2118401TLH-01-01-06	36151-01	Left Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release with torsion spring return (32740-01)	External trip lever release, .24" (6.1mm) hole (21184-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-3342901LVSL-0000000000-02-01-12	33564-01	Left Hand	M6 X 1.0 Threaded Axles	Release lever, .37" (9.4mm) X .65" (16.5mm) slot, .200" (5.08mm) hole (33429-01)	None	Heavy Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge and small end cutouts	A/A
	0500103-2-06-3468401LVHL-0000000000-01-01-10	34683-01	Left Hand	M6 X 1.0 Threaded Axles	Release lever, .13" (3.3mm) hole (34684-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-2-06-3610901LVRR-3583901TLH-01-01-06	36108-01	Left Hand	M6 X 1.0 Threaded Axles	Lever release (36109-01)	External trip lever release, .16" (4mm) hole (35839-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-3610901LVRR-4026401ESK-01-01-21	40262-02	Left Hand	M6 X 1.0 Threaded Axles	Lever release (36109-01)	External trip lever release with extension spring, knob (40264-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout and back plate edge/corner cutouts	A/A
	0500103-2-06-3611701TLRC-1127716TTH-01-01-06	36177-01	Left Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (36117-01)	External trip lever release with torsion spring, .238" (6.04mm) hole (11277-16)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-3682901LVHL-0000000000-01-01-10	14499-03	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .257" (6.53mm) hole (36829-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-2-06-3702701LVHL-0000000000-01-01-10	14499-02	Left Hand	M6 X 1.0 Threaded Axles	Lever release, .265" (6.73mm) hole (37027-01)	None	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Back plate edge and end cutouts	A/A
	0500103-2-06-5144201TLRC-1127716TTH-01-00-06	51440-01	Left Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (51442-01)	External trip lever release with torsion spring, .238" (6.04mm) hole (11277-16)	Normal Duty Catch Spring	None	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-5144201TLRC-5208201TRC-01-01-06	52076-01	Left Hand	M6 X 1.0 Threaded Axles	Lever/trip lever release, .120" (3.05mm) rod clip (51442-01)	External trip lever release, .169" (4.29mm) rod clip (52082-01)	Normal Duty Catch Spring	Normal Duty Internal Trip Lever Spring	Front plate edge cutout + Back plate edge cutout	A/A
	0500103-2-06-8111016CNTD-0000000000-01-00-03	16762-01	Left Hand	M6 X 1.0 Threaded Axles	Catch release (81110-16)	None	Normal Duty Catch Spring	None	Front plate end cutout	A/A

050-0103 Two Rotor Latch Two Position Intertrip

Typical Uses

050-0103 Two Rotor Latch Two Position Intertrip

Please specify search criteria:

92/92 result(s) match your searching criteria.

Products

Industries

Support

Contact Us

My Info

TriMark Global Sites

About Us

TriMark Corporation (USA)

TriMark Europe

TriMark China