050-0107 Two Rotor Latch With Coaxial Trip

This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway entrance doors, compartments and access panels. It features a coaxial trip mechanism for applications where it is desirable to provide additional support to the trip lever and is FMVSS 206 (ECE R11) compliant.

DESIGNED FOR:

  • Medium to heavy weight doors for on or off-highway vehicle applications
  • Door thicknesses of 1-7/8" or greater (47.6 mm)
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results)
  • Applications where it is desirable to provide additional support to the trip lever

AVAILABLE:

  • In left or right hand configurations
  • With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286" (7.3mm) diameter "thru" axles
  • With trip lever options (please inquire)
  • With a torsion return spring

MATERIAL:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

FINISH:

  • Zinc plated, clear chromate steel components

INSTALLATION:

  • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included).
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1mm)

INTERNAL LUBRICATION:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts  

STRIKER INSTALLATION:

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt
  • After installation, check door alignment and door seal pressures

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Bolts in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0107 Two Rotor Latch With Coaxial Trip

  • Agricultural Tractor / Combine

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Personnel Doors


  • Bus / Motorcoach / Mass Transit

    Exterior Personnel Doors


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Exterior Personnel Doors

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Personnel Doors


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Interior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors


  • Heavy Truck / Sleeper Cabs

    Exterior Personnel Doors


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Engine Compartments / Hoods

    Exterior Personnel Doors


Please specify search criteria:

 

  • Handing :

 

  • Mounting :

 

  • Actuation :

 

  • Knob Option :

 

  • Actuation Feature :

 

  • Secondary Actuation :

 

  • Catch Spring :

 

  • Coaxial Trip Lever Support :

CompareCatalog NumberTriMark NumberHandingMountingActuationKnob OptionActuation FeatureSecondary ActuationCatch SpringCoaxial Trip Lever SupportStatus CodeCAD Drawing
0500107-1-01-14322.01-0-0-00000-1-114323-01 Right Hand 1/4-20 UNC Threaded Axles Conventional Straight, Right Hand Coaxial Actuator, .896 X 1.400 X 1.400, .237 holes (14322-01) None No Actuation Feature None Normal Duty Catch Spring Back plateA/A
0500107-1-01-17305.01-2-1-21900-1-117307-01 Right Hand 1/4-20 UNC Threaded Axles Finger Release, Right Hand Coaxial Actuator (17305-01) Two Knobs Torsion Spring Push, LH, 2.28 Long Normal Duty Catch Spring Back plateA/A
0500107-1-01-17305.01-4-1-21900-1-117307-02 Right Hand 1/4-20 UNC Threaded Axles Finger Release, Right Hand Coaxial Actuator (17305-01) Two Knobs unassembled, sealed in bag Torsion Spring Push, LH, 2.28 Long Normal Duty Catch Spring Back plateA/A
0500107-1-01-23262.01-0-1-00000-2-141180-01 Right Hand 1/4-20 UNC Threaded Axles Lever, Trip, Coaxial, Right Hand (23262-01) None Torsion Spring None Heavy Duty Catch Spring Back plateA/A
0500107-1-01-34221.01-0-1-00000-2-134223-01 Right Hand 1/4-20 UNC Threaded Axles Conventional 3 point L-Shaped, Right Hand Coaxial Actuator (34221-01) None Torsion Spring None Heavy Duty Catch Spring Back plateA/A
0500107-1-01-34240.01-1-1-00000-2-141181-01 Right Hand 1/4-20 UNC Threaded Axles Lever, Trip, Coaxial, Right Hand (34240-01) One Knob Torsion Spring None Heavy Duty Catch Spring Back plateA/A
0500107-1-01-36047.01-0-2-00000-2-136048-01 Right Hand 1/4-20 UNC Threaded Axles Right Hand, Coaxial, Angled, 65.0mm X 28.6 (36047-01) None Extension Spring None Heavy Duty Catch Spring Back plateA/A
0500107-1-01-36957.01-0-1-00000-1-136959-01 Right Hand 1/4-20 UNC Threaded Axles Right Hand, Coaxial, Offset, L (36957-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-16526.01-1-1-21899-1-116527-01 Right Hand M6 X 1.0 Threaded Axles Conventional Straight, Right Hand Coaxial Actuator, 2.000 (16256-01) One Knob Torsion Spring Push, RH, 2.28 Long Normal Duty Catch Spring Back plateA/A
0500107-1-06-18673.01-1-1-00000-1-118674-01 Right Hand M6 X 1.0 Threaded Axles Conventional L-Shaped, Right Hand Coaxial Actuator, 1.260 X 2.163, Slot (18673-01) One Knob Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-19472.01-0-1-21899-1-119476-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator, 4.25" Long, Dipped (19472-01) None Torsion Spring Push, RH, 2.28 Long Normal Duty Catch Spring Back plateA/A
0500107-1-06-20050.01-0-1-00000-1-120052-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Right Hand, .94 X 2.83, Form (20050-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-20050.02-0-1-00000-1-132125-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Right Hand, .94 X 2.83, Form, Dipped (20050-02) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-20245.01-0-0-00000-1-120246-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Reverse Actuation, Right Hand, 5.75 (20245-01) None No Actuation Feature None Normal Duty Catch Spring Back plateA/A
0500107-1-06-20396.01-0-1-11280-1-133153-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Spoon, Dipped (20396-01) None Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 Deg Normal Duty Catch Spring Back plateA/A
0500107-1-06-20483.01-0-1-39799-1-140838-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Spoon, Dipped (20483-01) None Torsion Spring Lever,Trip Normal Duty Catch Spring Back plateA/A
0500107-1-06-21948.01-0-1-21946-2-121950-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator, 4.07 Long (21948-01) None Torsion Spring Pull, LH, Angled 15 Deg Heavy Duty Catch Spring Back plateA/A
0500107-1-06-22226.01-0-1-21946-1-122227-01 Right Hand M6 X 1.0 Threaded Axles R17.0 mm Paddle Shape, Right Hand, Coaxial Actuator (22226-01) None Torsion Spring Pull, LH, Angled 15 Deg Normal Duty Catch Spring Back plateA/A
0500107-1-06-24683.01-0-1-00000-1-124686-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator With Rod Connection, 6.57 Long, Dipped (24683-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-24799.01-0-1-21914-1-124800-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand Coaxial Actuator, 3.62 Long (24799-01) None Torsion Spring Pull, RH, Straight, 1.82 Long, Slot Normal Duty Catch Spring Back plateA/A
0500107-1-06-25705.01-0-2-25699-1-125701-01 Right Hand M6 X 1.0 Threaded Axles Lever, Trip,.205 Hole (25705-01) None Extension Spring Lever, Trip, Coaxial, Right Hand, .205 Hole Normal Duty Catch Spring Back plateA/A
0500107-1-06-28242.01-0-1-00000-1-128240-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand,Coaxial Actuator, Dipped (28242-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-31129.01-0-0-00000-1-131124-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Right Handed, 4.25 X .98 (108.0mm X 24.9mm) (31129-01) None No Actuation Feature None Normal Duty Catch Spring Back plateA/A
0500107-1-06-31309.01-1-1-31486-1-131504-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Right Handed, 123mm X 45mm (31309-01) One Knob Torsion Spring Pull, Non-handed, 76mm x 57mm Normal Duty Catch Spring Back plateA/A
0500107-1-06-32748.01-1-1-21913-1-132747-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Right Hand Coaxial Actuator (32748-01) One Knob Torsion Spring Direct Release L-Shaped, Right Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, Slot Normal Duty Catch Spring Back plateA/A
0500107-1-06-34073.01-0-1-00000-1-134429-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Z-Shape, Coaxial Pivot, Right Hand (34073-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-35679.01-0-0-21914-1-135831-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand Coaxial Actuator, 3.62 Long (35679-01) None No Actuation Feature Pull, RH, Straight, 1.82 Long, Slot Normal Duty Catch Spring Back plateA/A
0500107-1-06-35679.01-0-1-23205-1-135680-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand Coaxial Actuator, 3.62 Long (35679-01) None Torsion Spring Pull, LH, Straight, .97 Long Normal Duty Catch Spring Back plateA/A
0500107-1-06-37211.01-0-1-00000-1-137188-01 Right Hand M6 X 1.0 Threaded Axles Trip Lever, Coaxial, Right Hand (37211-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-38466.01-2-1-38480-1-138465-01 Right Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial,Left Hand (38466-01) Two Knobs Torsion Spring Pull,LH,Coaxial Normal Duty Catch Spring Back plateA/A
0500107-1-06-50190.01-1-1-11280-1-150191-01 Right Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 Deg Normal Duty Catch Spring Back plateA/A
0500107-1-06-50190.01-1-1-81509-1-150191-02 Right Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Lever, Trip, RH,.237 Hole Normal Duty Catch Spring Back plateA/A
0500107-1-06-50381.01-0-1-11280-1-150382-01 Right Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial,Left Hand,Offset (50381-01) None Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 Deg Normal Duty Catch Spring Back plateA/A
0500107-1-06-50752.01-1-1-50753-1-150751-01 Right Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial (50752-01) One Knob Torsion Spring Lever, Trip, Internal, 6.9MM Hole Normal Duty Catch Spring Back plateA/A
0500107-1-06-50902.0-0-0-50903-1-150900-01 Right Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Right Hand, Offset (50902-01) None No Actuation Feature Catch, External, Double Rotor/VCP, Right Hand, Zinc Plated Normal Duty Catch Spring Back plateA/A
0500107-1-06-51232.01-0-1-00000-1-151233-01 Right Hand M6 X 1.0 Threaded Axles Right Hand, Coaxial, 2 x 6.50 mm holes (51232-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-51281.01-1-1-00000-1-151271-01 Right Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial (51281-01) One Knob Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-1-06-51856.01-1-1-52303-1-152283-01 Right Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, RH (51856-01) One Knob Torsion Spring Lever, Trip, Internal, RH Normal Duty Catch Spring Back plateA/A
0500107-2-01-14321.01-0-0-00000-1-114324-01 Left Hand 1/4-20 UNC Threaded Axles Conventional 2-Point, Left Hand Coaxial Actuator, .896 X 1.400 X 1.400, .237 holes (14321-01) None No Actuation Feature None Normal Duty Catch Spring Back plateA/A
0500107-2-01-17306.01-2-1-21897-1-114913-01 Left Hand 1/4-20 UNC Threaded Axles Finger Release, Left Hand Coaxial Actuator (17306-01) Two Knobs Torsion Spring Push, RH, 2.28 Long Normal Duty Catch Spring Back plateA/A
0500107-2-01-26857.01-0-1-00000-1-126858-01 Left Hand 1/4-20 UNC Threaded Axles LVR,TRIP,COAX,LH,OFS,.276 HOLE (26857-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-01-28592.01-0-0-00000-1-128571-01 Left Hand 1/4-20 UNC Threaded Axles LVR,TRIP,COAX,LH,.234x.125 SLOT (28592-01) None No Actuation Feature None Normal Duty Catch Spring Back plateA/A
0500107-2-01-29077.01-0-1-00000-1-128556-01 Left Hand 1/4-20 UNC Threaded Axles LVR,TRIP,COAX,RH,.234x.125 SLOT (29077-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-01-34220.01-0-1-00000-2-134222-01 Left Hand 1/4-20 UNC Threaded Axles Conventional 3 point L-Shaped, Left Hand Coaxial Actuator (34220-01) None Torsion Spring None Heavy Duty Catch Spring Back plateA/A
0500107-2-01-36045.01-0-2-00000-2-136046-01 Left Hand 1/4-20 UNC Threaded Axles Left Hand, Coaxial, Angled, 65.0mm X 28.6 (36045-01) None Extension Spring None Heavy Duty Catch Spring Back plateA/A
0500107-2-01-36956.01-0-1-00000-1-136958-01 Left Hand 1/4-20 UNC Threaded Axles Left Hand, Coaxial, Offset, L (36956-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-18201.01-1-1-21909-1-118573-01 Left Hand M6 X 1.0 Threaded Axles Conventional Straight, Left Hand Coaxial Actuator, 2.000 (18201-01) One Knob Torsion Spring Push, RH, 1.84 Long Normal Duty Catch Spring Back plateA/A
0500107-2-06-18728.01-0-1-00000-1-118692-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator (18728-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-19475.01-0-1-21909-1-119473-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator, 4.25" Long, Dipped (19475-01) None Torsion Spring Push, RH, 1.84 Long Normal Duty Catch Spring Back plateA/A
0500107-2-06-20042.01-0-1-00000-1-120046-01 Left Hand M6 X 1.0 Threaded Axles Conventional L-Shaped 2 Point, Left Hand Actuation, 2.83 X 1.12 X 10 Deg (20042-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-20396.01-0-1-39799-1-139800-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Spoon, Dipped (20396-01) None Torsion Spring Lever,Trip Normal Duty Catch Spring Back plateA/A
0500107-2-06-21947.01-0-1-00000-1-124663-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator, 4.07 Long (21947-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-21947.01-0-1-21274-2-121949-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator, 4.07 Long (21947-01) None Torsion Spring Pull, RH, Angled 15 Deg Heavy Duty Catch Spring Back plateA/A
0500107-2-06-22223.01-0-0-21274-1-122224-01 Left Hand M6 X 1.0 Threaded Axles Trip Lever, Coaxial, Left Hand (22223-01) None No Actuation Feature Pull, RH, Angled 15 Deg Normal Duty Catch Spring Back plateA/A
0500107-2-06-22745.01-0-1-22763-1-125632-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator, Dipped (22745-01) None Torsion Spring Pull, RH, Straight Normal Duty Catch Spring Back plateA/A
0500107-2-06-23487.01-0-1-11280-1-123651-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator, 4.00 Long, Dipped (23487.-01) None Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 Deg Normal Duty Catch Spring Back plateA/A
0500107-2-06-25684.01-0-2-21274-2-125683-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator (25684-01) None Extension Spring Pull, RH, Angled 15 Deg Heavy Duty Catch Spring Back plateA/A
0500107-2-06-25710.01-2-2-25700-1-125702-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial (25701-01) Two Knobs Extension Spring Lever, Trip, Internal, LH Normal Duty Catch Spring Back plateA/A
0500107-2-06-26852.01-0-2-00000-1-126853-01 Left Hand M6 X 1.0 Threaded Axles Conventional 2 Point, Left Hand Coaxial Actuator, Angled (26852-01) None Extension Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-28739.01-0-2-00000-1-128738-01 Left Hand M6 X 1.0 Threaded Axles LVR,TRIP,COAX,LH,.205 HOLE (28739-01) None Extension Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-29191.01-0-1-21915-1-124802-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Left Hand Coaxial Actuator, 3.62 Long (29191-01) None Torsion Spring Pull, LH, Straight, 1.82 Long, Slot Normal Duty Catch Spring Back plateA/A
0500107-2-06-29762.01-0-1-00000-1-129761-01 Left Hand M6 X 1.0 Threaded Axles LVR,TRIP,COAX,OFS,2x.205 HOLE (29762-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-30430.01-1-1-29504-1-129374-01 Left Hand M6 X 1.0 Threaded Axles LVR,TRIP,COAX,LH (30430-01) One Knob Torsion Spring Lever, Trip, Internal, Offset, Left Hand, .238 x .299 Slot Normal Duty Catch Spring Back plateA/A
0500107-2-06-31130.01-0-1-00000-1-131123-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Left Handed, 4.25 X .98 (108.0mm X 24.9mm) (31130.01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-31244.01-1-1-31486-1-131488-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Left Handed, 123mm X 45mm (31244-01) One Knob Torsion Spring Pull, Non-handed, 76mm x 57mm Normal Duty Catch Spring Back plateA/A
0500107-2-06-31925.01-0-1-00000-1-131926-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial, 3.74 (94.9mm) Angled (31925-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-32857.01-1-1-21919-1-132856-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Left Hand Coaxial Actuator (32857-01) One Knob Torsion Spring Direct Release L-Shaped, Left Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, Slot Normal Duty Catch Spring Back plateA/A
0500107-2-06-34074.01-0-1-00000-1-134428-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Z-Shape, Coaxial Pivot, Left Hand (34074-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-34616.01-1-0-00000-2-140084-01 Left Hand M6 X 1.0 Threaded Axles Finger Releases, Left Hand Coaxial,125mm Long (34616-01) One Knob No Actuation Feature None Heavy Duty Catch Spring Back plateA/A
0500107-2-06-35537.01-0-1-35501-1-135492-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Coaxial, RH, 1PT, 31.35 X 30.0 (35537-01) None Torsion Spring Pull, Straight, 1.938 Normal Duty Catch Spring Back plateA/A
0500107-2-06-35677.01-0-1-21915-1-135832-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Left Hand Coaxial Actuator, 3.62 Long (35677-01) None Torsion Spring Pull, LH, Straight, 1.82 Long, Slot Normal Duty Catch Spring Back plateA/A
0500107-2-06-35677.01-0-1-23206-1-135678-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Left Hand Coaxial Actuator, 3.62 Long (35677-01) None Torsion Spring Pull, RH, Straight, .97 Long Normal Duty Catch Spring Back plateA/A
0500107-2-06-35728.01-1-1-17582-1-137419-01 Left Hand M6 X 1.0 Threaded Axles Left hand, Coaxial, knob, 7.24 X 27.0 X 69.4 (35728-01) One Knob Torsion Spring Pull, RH, Coaxial, Z-bend Normal Duty Catch Spring Back plateA/A
0500107-2-06-37212.01-0-1-00000-1-137189-01 Left Hand M6 X 1.0 Threaded Axles Trip Lever, Coaxial, Left Hand (37212-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-38398.01-2-1-38532-1-138397-01 Left Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial,Left Hand (38398.01) Two Knobs Torsion Spring Pull,LH,Coaxial Normal Duty Catch Spring Back plateA/A
0500107-2-06-40539.01-0-1-00000-1-140538-01 Left Hand M6 X 1.0 Threaded Axles Lvr, Trip, Coax, LH, OFS (40539-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-50190.01-1-1-11280-1-150724-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 Deg Normal Duty Catch Spring Back plateA/A
0500107-2-06-50190.01-1-1-51895-1-151858-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Lever, Trip, Coaxial Normal Duty Catch Spring Back plateA/A
0500107-2-06-50190.01-1-1-52302-1-152282-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Lever, Trip, Internal, LH Normal Duty Catch Spring Back plateA/A
0500107-2-06-50190.01-1-1-81509-1-150724-02 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand (50190-01) One Knob Torsion Spring Lever, Trip, RH,.237 Hole Normal Duty Catch Spring Back plateA/A
0500107-2-06-50904.01-0-0-50905-1-150901-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, Left Hand, Offset (50904-01) None No Actuation Feature Catch, External, Double Rotor/VCP, Left Hand, Zinc Plated Normal Duty Catch Spring Back plateA/A
0500107-2-06-51250.01-0-1-00000-1-151249-01 Left Hand M6 X 1.0 Threaded Axles Left Hand, Coaxial, 2 x 6.50 mm holes (51250-01) None Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-51280.01-1-1-00000-1-151270-01 Left Hand M6 X 1.0 Threaded Axles Lever,Trip,Coaxial (51280-01) One Knob Torsion Spring None Normal Duty Catch Spring Back plateA/A
0500107-2-06-51857.01-1-1-51856-1-151855-01 Left Hand M6 X 1.0 Threaded Axles Lever, Trip, Coaxial, LH (51857-01) One Knob Torsion Spring Lever, Trip, Coaxial, Right Hand Normal Duty Catch Spring Back plateA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale