100-0410 Cage Nut

Designed as a companion part for use with TriMark's striker bolts, this product allows for vertical and horizontal adjustment for most striker bolts with 3/8"-16 or 7/16"-14 threads. It is available as a one-piece assembly or as separate parts for lowest cost and is FMVSS 206 (ECE R11) compliant.

Technical Publication

Designed For

Entrance doors and compartment doors with a 3/8"-16 or 7/16"-14 striker bolt application

Available

3/8"-16 or 7/16"-14 threads
Up to .250" (6.4mm) total vertical and .125" (3.2mm) total door seal adjustment
One piece assembly for simplified installation
Nut and retainer available separately for lowest cost

Installation

Mounts with standard 1/4-20 screws (not included)
Striker bolt mounting close to edge to allow use in applications where striker bolt is close to the frame edge

Note: Steel nut withstands tensile loads applied to striker bolt in excess of 2500 lbs. (1134 kg) as required by FMVSS 206 (ECE R11).

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Compare	Catalog Number	TriMark Number	Description	Status Code	CAD Drawing
	1000410-1-01-1-1	11920-16	3/8-16 UNC,Standard,Standard,USA	A/A
	1000410-2-01-1-1	12111-16	7/16-14 UNC,Standard,Standard,USA	A/A
	1000410-2-02-1-1	26965-01	7/16-14 UNC,Heavy Duty,Standard,USA	A/A
	1000410-4-04-1-1	33562-02	Other,Slotted, unthreaded, version B,Standard,USA	A/A