050-0210 Slimline Rotary Latch Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features a variety of trip levers and mounting axles for ease of mounting and applications.

    Designed For

    • Thinner, light or medium weight door applications
    • Door weights up to 75 lbs. (34 kg)
    • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
    • Visible surface installation or concealed installation
    • Applications where it is desireable to have a single position rotor latch
    • Use with TriMark 070-0100 Striker Bolt

    Available

    • Left or right hand configurations
    • With standard .265" (6.7 mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles or M6 x 1.0 threaded axles

    Material

    • Internal latch components: heat treated smooth edge stamped steel
    • Springs: non-corrosive stainless steel
    • Case halves: high strength steel

    Finish

    • Zinc plated, clear chromate steel components

    Installation

    • (3) 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
    • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
    • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

    Internal Lubrication

    • Oven-cured dry lubricant is applied on all critical moving parts

    Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

    Typical Uses

    Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

    Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

    050-0210 Slimline Rotary Latch Single-Position

    • Agricultural Tractor / Combine

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Bus / Motorcoach / Mass Transit

      Access Panels

      Baggage Doors

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Construction - Heavy Earthmoving

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Construction - Lifting and Material Handling

      Access Panels

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Construction - Light Earthmoving

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods


    • Fire / Rescue / Ambulance / Emergency Vehicle

      Access Panels

      Exterior Storage Compartments


    • Heavy Truck / Sleeper Cabs

      Baggage Doors

      Engine Compartments / Hoods

      Exterior Storage Compartments

      Tool Boxes


    • Industrial Enclosure/Cabinet

      Access Panels/Cabinet Doors

      Exterior Storage Compartments


    • Motor Homes

      Baggage Doors


    • Pick-up Truck - Tool Boxes / Topper / Tonneau

      Tool Boxes

      Topper / Tonneau


    • Step Van / Walk-in Vans / Delivery Vehicle

      Exterior Storage Compartments

      Tool Boxes


    • Trailers - Ranch / Farm / Cargo / Utility

      Access Panels

      Exterior Storage Compartments


    • Travel Trailer / 5th Wheel

      Baggage Doors


    • Utility Bodies / Wreckers / Specialty Truck

      Exterior Storage Compartments

      Tool Boxes


    Please specify search criteria:


    CompareCatalog NumberTriMark NumberHandingMountingActuationActuation FeatureStatus CodeCAD Drawing
    0500210-1-01-1547001-015475-01 Right Hand 1/4-20 UNC Threaded Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm) No Actuation FeatureA/A
    0500210-1-04-8118516-018198-01 Right Hand 0.265 (7.3mm) Diameter Through Axles Non-handed, 2-Holes, 1.25, .625 x 1.08, .250 Dia holes No Actuation FeatureA/A
    0500210-1-06-8093416-014953-02 Right Hand M6 X 1.0 Threaded Axles Straight, Non-Handed, 1.25 X .237 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
    0500210-2-01-1547001-015476-01 Left Hand 1/4-20 UNC Threaded Axles Straight, Non-Handed, 1.25 X .255 Dia Hole (31.8mm X 6.6mm) No Actuation FeatureA/A
    0500210-2-04-8118516-018197-01 Left Hand 0.265 (7.3mm) Diameter Through Axles Non-handed, 2-Holes, 1.25, .625 x 1.08, .250 Dia holes No Actuation FeatureA/A
    0500210-2-06-8093416-014952-02 Left Hand M6 X 1.0 Threaded Axles Straight, Non-Handed, 1.25 X .237 Dia Hole (31.8mm X 6.6mm), Stamped No Actuation FeatureA/A
    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale