030-0100 Single Rotor Compartment Latch

Designed for most medium to heavy-duty storage and compartment doors, this product features an integrated rotary latch for ease of installation and use.

Technical Publication

Designed For

On or off-highway vehicle applications -- construction, mining, agricultural
Service and utility truck body doors
Fire and rescue unit vehicles
Most storage, compartment and access doors with latch and strike location at top or sides of door
Door weights of approximately 75 lbs. (34 kg) or less

Available

Keyed alike
Keyed random
Padlockable

Material

Housing and paddle: die cast zinc alloy
Other components: zinc plated, mild steel
Internal latch components: case hardened, smooth edge stamped steel

Finish

Clear chromate, ready to paint
Buffed copper-nickel-chrome plated
Buffed duplex nickel

Internal Lubrication

Oven-cured dry lubricant is applied on all critical moving parts

Installation

3/16" (4mm) diameter fasteners

Application Recommendations

Striker bolt installation should allow for a minimum radial movement of .060" (1.524mm)
Rubber bumpers or door seals are recommended to reduce effects of vibration stress on door and latch system

Latch & Striker Installation

Install striker bolt in door frame
Close door carefully and check for interference between head of striker bolt and latch components
Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
Adjust striker bolt vertically so door is not guided upward or downward while being closed
CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCH POSITIONS ARE USABLE
Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
If both primary and secondary positions are not evident, readjust striker bolt.

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0100 Single Rotor Compartment Latch

Armored Vehicle
Exterior Storage Compartments
Construction - Heavy Earthmoving
Exterior Storage Compartments
Construction - Lifting and Material Handling
Exterior Storage Compartments
Construction - Light Earthmoving
Exterior Storage Compartments
Fire / Rescue / Ambulance / Emergency Vehicle
Exterior Storage Compartments
Industrial Enclosure/Cabinet
Access Panels/Cabinet Doors
Exterior Storage Compartments
Utility Bodies / Wreckers / Specialty Truck
Exterior Storage Compartments
Tool Boxes

Please specify search criteria:

	Key Type (Head Configuration) :
	Key Type (Color) :
	Key Type (Logo) :
	Keying :
	Keying (Lock Cylinder Part Number) :
	Keying (Keys Supplied) :
	Keying (Key Part Number) :
	Keying (Number of Keys per PN) :

Compare	Catalog Number	TriMark Number	Key Type (Head Configuration)	Key Type (Color)	Key Type (Logo)	Keying	Keying (Lock Cylinder Part Number)	Keying (Keys Supplied)	Keying (Key Part Number)	Keying (Number of Keys per PN)	Status Code	CAD Drawing
	0300100-3-005-02-03-02-02-14082.04-1-0-2	10330-35	Small Round Head	Black overmold	TriMark logo	Non-master keyed/keyed alike	LKCYL,TD,KS900,LL11,2 KEYS	Yes	NA	2 keys on ring	A/A
	0300100-3-015-00-00-00-14-0-0-0-0	11414-09	No key	No key	No key	Padlockable	NA	No	NA	0 keys	A/A

Compare

Catalog Number

TriMark Number

Key Type (Head Configuration)

Key Type (Color)

Key Type (Logo)

Keying

Keying (Lock Cylinder Part Number)

Keying (Keys Supplied)

Keying (Key Part Number)

Keying (Number of Keys per PN)

Status Code