030-5200 厢门翻板把手

This flush mounted paddle handle is designed specifically for light to medium to compartment doors for off-highway applications that require remote actuation.

这款厢门翻板把手专为轻到中型车厢门设计的非公路车辆使用，使用远程驱动装置

DESIGNED FOR:

Off-highway construction equipment applications
Compartment doors requiring latch location remote from actuating handle
Door thickness of 70mm or greater

设计应用：

非公路工程机械车辆
厢门要求闩锁位置远离开启把手
门厚大于等于70毫米

FEATURES/BENEFITS:

The paddle handle is rigid when locked
Engineered plastic construction withstands corrosion and UV exposure

特性/优点：

翻版把手锁紧后稳定性强
工程塑料结构可抗腐蚀和紫外线照射

AVAILABLE:

Left or right-hand configuration (right hand shown)
Can be keyed alike with most single and reversible key systems

现有功能：

左右手型通用（图示为右手型）
与大多数单向和双向可逆钥匙系统都能配套使用

INSTALLATION:

Design provides for easy installation without a mounting bracket with the use of (4) M6 x 1.0 bolts (not included)

安装：

设计便于安装，无需安装支架，使用（4）个M6 x 1.0螺栓（用户自备）

MATERIAL/FINISH:

Handle/Housing: Glass reinforced Nylon 6 - black in color
Pivot plate, paddle axle and pins: mild steel - zinc plated clear chromate
Return spring and lock cylinder scalp: stainless steel
Lock cam and lock cylinder: diecast zinc alloy
Mounting inserts: brass

材料/表面处理：

把手/锁壳：玻璃纤维增强尼龙6-黑色
销板、轴和销：低碳钢-镀锌透明铬酸盐
回位弹簧和锁芯帽：不锈钢
挡片和锁芯：压铸锌合金
安装嵌件：黄铜

USE WITH:

TriMark 050-5260 8mm Single Rotor Compartment Latch

配套使用：

特利马克050-5260 8毫米单转子厢门闩锁

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

单个零件尺寸仅供参考. 有关完整的零件尺寸、标准和安装程序，请参阅子件图纸. 咨询提供技术支持和产品应用.

CAUTION: Product does not meet the locking requirements for FMVSS 206 (ECE R11).

注意：产品不符合FMVSS206（ECE R11）的锁定要求