• Home
  • 新产品
  • 110-5100 Locking Fuel Cap and Filler Neck 油箱盖和油脖颈

110-5100 Locking Fuel Cap and Filler Neck 油箱盖和油脖颈

This double locking diesel fuel cap fits standard 124mm O.D. and 91mm I.D. filler necks with bayonet retention. It is designed for non-vented fuel tanks for medium to heavy-duty off-highway vehicles where it is desirable to prevent theft and vandalism. In addition to standard padlock provisions, this product includes an integrated keylock that can be provided keyed alike to match doors and ignition or keyed random.

 本款带双锁功能的柴油机油箱盖适用的标准外径为124毫米,内径91毫米的加油口,卡口可固定。本品专为中型至重型非公路车辆设计,有防盗和防破坏功能。除了标准的挂锁配置,该产品还有一个集成的钥匙锁,可更换不同的锁芯和钥匙,同时匹配门和点火开关。

FEATURES/BENEFITS:
  • Meets Tier 4 regulations for two-way venting, fuel leakage and water intrusion resistance
  • Double locking provides for enhanced security with the keylock installed under operating level for water and dust protection
  • Serviceable air filter (4-micron filtration) prohibits water penetration as well as dust infiltration into the fuel tank extending the life of the fuel cap
  • Compatible with all grades of diesel fuel including ultra-low sulfur, ethanol blend and biodiesel

特性/优点:

  • 满足国四规定的双向通风、燃油泄漏和防进水要求
  • 双锁功能,增强了安全性,钥匙锁安装在操作杆下可以防水和防尘
  • 选用了(4微米过滤)空气滤,可防止水和灰尘渗入燃油箱,从而延长燃油盖的使用寿命
  • 可使用所有类型的柴油,包括超低硫、乙醇混合物和生物柴油

AVAILABLE:
  • Can be keyed to match most single and reversible key systems
  • Padlockable only without integrated keylock

现有功能:

  • 与大多数单向和双向可逆钥匙系统都能配套使用
  • 挂锁只能在没有集成钥匙锁的情况下使用 

INSTALLATION:
  • Cap design fits standard bayonet style fuel filler necks: 124mm O.D. and 91mm I.D.

安装:

  • 盖子设计适合标准卡口式加油管:外径124毫米,内径91毫米 

MATERIAL:
  • Corrosion resistant aluminum diecast cap and operating level
  • All metal components: passivated stainless steel
  • Gaskets, O-rings and washers: nitrile butadiene rubber (NBR)
  • Filter cover, base and other non-metallic components: glass reinforced nylon (black)

材料:

  • 耐腐蚀压铸铝盖和操作杆
  • 所有金属部件:钝化不锈钢
  • 垫圈、O形圈和垫片:丁腈橡胶(NBR
  • 油箱盖、底座和其他非金属部件:玻璃纤维增强尼龙-黑色 

FINISH:
  • Black powder coated cap and operating level

表面处理:

  • 油箱盖和操纵杆黑色喷粉 

USE WITH:
  • TriMark stainless steel filler neck that is designed to be welded onto the fuel tank

配套使用:

  • 特利马克不锈钢油颈可焊接到燃油箱上

 

Individual part dimensions are for reference only.  Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

单个零件尺寸仅供参考。有关完整的零件尺寸、标准和安装程序,请参阅子件图纸。咨询提供技术支持和产品应用。

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

110-5100 Locking Fuel Cap and Filler Neck 油箱盖和油脖颈

请设置过滤条件:


CompareCatalog NumberTriMark NumberFiller Neck Size OD x IDHeight of filler neckFuel Cap Size DiameterKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)LockingStatus CodeSample RequestCAD Drawing
1105100-0-0-1-00-00-00-00-0-0-0-0-152264-02 None 75mm None No key No key No key Non-locking or N/A NA No NA 0 keys Padlock onlyA/A
1105100-0-0-1-00-00-00-20-516452119-01 None None 136.3mm         Padlock and Keylock A/CP
    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale