070-5050 8mm撞环

The 070-5050 8mm Hoop Strike is designed as a companion part for use with TriMark’s single rotor latches that requires an 8mm diameter striker and FMVSS 206 (ECE R11) is not required.

这款070-5050 8毫米撞环为配合特利马克单转子闩锁的使用而设计,撞环不FMVSS 206ECE R11)要求。

FEATURES/BENEFITS:
  • Automotive style hoop-type strike features low profile and minimizes snag hazard
  • Base mounted style provides a rigid base for strike support
  • Welded construction and heat treated

特性/优点:

  • 汽车用环式设计,避免钩住衣物,性价比高。
  • 铆接式安装底座,使产品更坚固,承受更大撞击力
  • 焊接结构及热处理工艺


AVAILABLE:
  • Various versions are available, please inquire
  • Some versions have adjustable base plates eliminating the need for moveable mounting nut plate

现有功能:

  • 各类型撞栓版本配置,详情请咨询。
  • 部分型号有可调底板,无需安装移动螺母板

MATERIAL/FINISH:
  • Hoop material is medium carbon steel, heat treated for strength and long life
  • Zinc plated with clear chromate

材料及表面处理:

  • 撞环材料为中碳钢,经过热处理,强度高寿命长
  • 表面镀锌、光亮铬酸盐处理

INSTALLATION:
  • (2) M6 x 1 class 10.9 flat head fasteners are required (not included)
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 135 in-lbs (15.0 N-m)
  • NOTE: Aligning the latch and the hoop striker is KEY to proper latch function

安装:

  • 需要两个M6 x 1 10.9级平头紧固件(用户自备)
  • 拧紧至紧固件制造商建议的扭矩值,但不得超过135 磅(15.0牛米)
  • 注意:把锁和撞栓安装时至关重要


USE WITH:
  • TriMark's Single Rotor Latches that require an 8mm diameter striker

配套使用:

  • 特利马克单转子闩锁需要配置直径为8毫米的撞针


Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

单个零件尺寸仅供参考。有关完整的零件尺寸、标准和安装程序,请参阅子件图纸。咨询提供技术支持和产品应用。

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

070-5050 8mm撞环

请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale