050-0210 Slimline Rotary Latch Single Position

Designed For:

• Thinner, light or medium weight door applications requiring resistance to dust and vibration
• Door weights up to 75 lbs. (34kg)
• Door seal pressures of 20-25 lbs. (9-11kg) recommended for best results (not to exceed 50 lbs - 23kg)
• Visible surface or concealed installation
• Applications where it is desireable to have the release mechanism in line with the latch

Material:

• Internal latch components: heat treated, smooth edge stamped steel
• Case halves: high strength steel
• Springs: non-corrosive stainless steel

Finish:

• Zinc plated, yellow chromate steel components
• Stainless steel

Installation:

• Three M6 X 1 class 8.8 or better fasteners are recommended
• Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
• Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

Available:

• Left or right hand configurations
• With standard .267 (6.7mm) diameter "thru" axles or 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles