050-0170 Two-Rotor Latch With Bellcrank Linkage

Designed For:

• Medium to heavy weight doors for on or off-highway applications
• Door thicknesses of 1-7/8" (47.6mm) or greater
• Door weights of 50-200 lbs. (23-91kg)
• Door seal pressures of 50-150 lbs. (23-68kg) (suggested for best results)
• Applications where it is desireable to have a single position rotary latch

Material:

• Internal latch components: heat treated, smooth edge stamped steel
• Case halves: high strength steel
• Springs: non-corrosive stainless steel springs

Finish:

• Zinc plated, yellow chromate steel components

Installation:

• Four M6 X 1 class 8.8 or better mounting fasteners are required (not included). Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
• Maximum .281" (7.1mm) diameter mounting holes