Home
Products
Europe Distribution Parts

050-0110 Two-Rotor 1-Position Latch

Designed For:

Medium to heavy weight doors for on or off-highway applications
Door thicknesses of 1-7/8" (47.6mm) or greater
Door weights of 50-200 lbs. (23-91kg)
Door seal pressures of 50-150 lbs. (23-68kg) (suggested for best results)
Applications where it is desireable to have a single position rotary latch

Material:

Internal latch components: heat treated, smooth edge stamped steel
Case halves: high strength steel
Springs: non-corrosive stainless steel springs

Finish:

Zinc plated, yellow chromate steel components

Installation:

Four M6 X 1 grade 8.8-type fasteners are required (not included). Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
Fastener mounting hole diameter should not exceed .281" (7.1mm)

Use With:

TriMark 030-0200 Paddle Handle
11328-03
11330-02
TriMark 030-0250 Paddle Handle With Inside Release Lever
12219-12
12220-12
TriMark 030-0400 Paddle Handle
13438-04
11744-02
TriMark 030-0450 2-Point Paddle Handle
11812-03
11813-37
TriMark 070-0200 .675" Diameter Striker Bolt
11111-16
11813-37
11111-16
11813-37
TriMark 090-0100 Rod Clips

Internal Lubrication:

Oven-cured dry lubricant is applied at factory on all critical moving parts
CAUTION: Single-position, double rotor latches do not comply with FMVSS 206 requirements

Part Number	Handing	Mounting	Actuation	Actuation Feature	Actuation Support	SKU Number
11450-16	Right hand	0.286" (7.25mm) diameter through axles	Conventional L-shaped, non-handed, v01-0.887 X 1.872 (22.5mm X 47.5mm),spring hole	No actuation feature	Standard mount	0500100-102-30014-01

©2012 TriMark Corporation. All rights reserved. Privacy • Legal Info • Terms and Conditions of Sale