030-0860 Flush Mounted Paddle Handle With Inside Lock Knob

This flush paddle was designed for medium to heavy-duty, on-highway vehicle entrance doors and features robust construction, an inside lock knob for use as an inside release and is compliant to FMVSS 206 (ECE R11). It incorporates the basic material and concepts used in the 030-0800 Flush Mounted Paddle Handle.

Features/Benefits

  • Inside lock provides override if outside paddle should be locked
  • Paddle is rigid when locked

Material

  • Housing and paddle: Die cast zinc alloy
  • Pivot components: Zinc plated, mild steel
  • Bushing for paddle axle and thrust washers for pivot plate: Nylon 6/6

Finish

  • Black powder coated
  • Chrome plated

Installation

  • Either handed version can be installed in a wide range of locations in door--either horizontal or vertical orientation

Complies with FMVSS 206 (ECE R11) when used in conjunction with 030-0850 Flush Mounted Paddle Handle and approved latching mechanisms

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0860 Flush Mounted Paddle Handle With Inside Lock Knob

  • Agricultural Tractor / Combine

    Interior Personnel Doors


  • Armored Vehicle

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Interior Personnel Doors


  • Construction - Lifting and Material Handling

    Interior Personnel Doors


  • Construction - Light Earthmoving

    Interior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Interior Personnel Doors


  • Heavy Truck / Sleeper Cabs

    Interior Personnel Doors


  • Motor Homes

    Interior Personnel Doors


  • Replicars / Kit Cars

    Interior Personnel Doors


  • Step Van / Walk-in Vans / Delivery Vehicle

    Interior Personnel Doors


  • Trailers - Ranch / Farm / Cargo / Utility

    Interior Personnel Doors


  • Travel Trailer / 5th Wheel

    Interior Personnel Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMaterial and FinishPivot PlateLock ArmAccessoriesReturn SpringStatus CodeSample RequestCAD Drawing
0300860-1-037-1259702-1528901A-1-122475-02 Right Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-037-1259702-1528901A-1-219551-01 Right Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 3.375 lbs initial tension, 25 lbs/in spring rateA/A
0300860-1-037-1259702-1528901C-1-122476-02 Right Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-037-1259704-1528901C-1-115449-11 Right Hand Low Gloss Black 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-037-2496601-2496701C-1-124968-02 Right Hand Low Gloss Black 3-Point, Dia .312 (7.9mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .250 (6.4mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-037-3030001-1917901A-1-141763-02 Right Hand Low Gloss Black 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-1259701-1528901C-1-115449-02 Right Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Zinc (ES-104) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-1259702-1528901A-1-219551-02 Right Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 3.375 lbs initial tension, 25 lbs/in spring rateA/A
0300860-1-063-1259702-1528901C-1-115449-07 Right Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rate A/CP
0300860-1-063-1259704-1528901C-1-115449-13 Right Hand Copper-Nickel Nickel Chrome 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-1492702-1528901C-1-115449-10 Right Hand Copper-Nickel Nickel Chrome 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-2071801-2069201F-2-120681-01 Right Hand Copper-Nickel Nickel Chrome 2-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style F Mounting Brackets Included, Mounting Bolts NOT included 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-2496601-2496701C-1-124968-01 Right Hand Copper-Nickel Nickel Chrome 3-Point, Dia .312 (7.9mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .250 (6.4mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-3030001-1917901A-1-141763-01 Right Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-3030001-1917901C-1-130516-01 Right Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-063-3030001-1917901C-1-330516-02 Right Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.4 lbs initial tension, 10.0 lbs/in spring rateA/A
0300860-1-063-8140116-1528901D-1-115449-12 Right Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Zinc (ES-104) 1-Point Linkage Lock, Dia .236 (5.9mm), Style D Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-1-099-1492701-1528901C-1-115449-06 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex Nickel) Handle 4-Point, Dia .265 (6.7mm) / Zinc (ES-104) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-037-1265802-1528901A-1-122467-02 Left Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-037-1265802-1528901C-1-122465-02 Left Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-037-1265802-1528901C-1-219552-01 Left Hand Low Gloss Black 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 3.375 lbs initial tension, 25 lbs/in spring rateA/A
0300860-2-037-1265804-1528901A-1-115294-11 Left Hand Low Gloss Black 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-037-1265804-1528901C-1-122431-01 Left Hand Low Gloss Black 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-037-3050701-1917901C-1-141762-02 Left Hand Low Gloss Black 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-1265801-1528901A-1-115294-02 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Zinc (ES-104) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-1265802-1528901A-1-115294-07 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rate A/CP
0300860-2-063-1265802-1528901C-1-219552-02 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 3.375 lbs initial tension, 25 lbs/in spring rateA/A
0300860-2-063-1265804-1528901A-1-115294-13 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-1492605-1528901A-1-115294-10 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-1953301-1321601E-1-119435-01 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Handle Lock, Dia .237 (6.0mm), Style E Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-1953301-1917901C-1-119564-01 Left Hand Copper-Nickel Nickel Chrome 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Linkage Lock, Dia .236 (5.9mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-2067601-2069201G-2-120682-01 Left Hand Copper-Nickel Nickel Chrome 2-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style G Mounting Brackets Included, Mounting Bolts NOT included 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-3050701-1917901A-1-130515-01 Left Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-3050701-1917901A-1-330515-02 Left Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style A Mounting Brackets and Mounting Bolts 1.950 free length, 2.4 lbs initial tension, 10.0 lbs/in spring rateA/A
0300860-2-063-3050701-1917901C-1-141762-01 Left Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Linkage Lock, Dia .237 (6.0mm), Style C Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
0300860-2-063-8140116-1528901B-1-115294-12 Left Hand Copper-Nickel Nickel Chrome 1-Point, Dia .237 (6.0mm) / Zinc (ES-104) 1-Point Linkage Lock, Dia .236 (5.9mm), Style B Mounting Brackets and Mounting Bolts 1.950 free length, 2.1 lbs initial tension, 15.5 lbs/in spring rateA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale