Designed For:

Thinner, light or medium weight door applications requiring resistance to dust and vibration
Door weights up to 75 lbs. (34kg)
Door seal pressures of 20-25 lbs. (9-11kg) recommended for best results (not to exceed 50 lbs - 23kg)
Visible surface or concealed installation
Applications where it is desireable to have the release mechanism in line with the latch

Material:

Three M6 X 1 class 8.8 or better fasteners are recommended
Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

TriMark 030-0200 Paddle Handle
11328-03
11330-02
TriMark 030-0250 Paddle Handle With Inside Release Lever
12219-12
12220-12
TriMark 030-0450 2-Point Paddle Handle
11812-37
11813-37
TriMark 030-1100 2-Point Paddle Handle
12395-05
TriMark 040-0400 Push Button Center Control
15992-01
TriMark 070-0100 .500" (12.7mm) Diameter Striker Bolt
81667-16
10335-16
TriMark 090-0100 Rod Clips
80801
80802
TriMark 100-0410 Cage Nut
11920-16
12111-16
Standard .265 (6.7mm) diameter through axles, 1/4-20 UNC threaded axles, or M6 X 1.0 threaded axles
Two position rotary latches comply with FMVSS 206 in primary and secondary latching positions when tested with approved TriMark striker bolts in accordance with SAE J839.
CAUTION: Single position rotary latches do not comply with FMVSS 206 requirements.

Part Number	Handing	Mounting	Actuation	Actuation Feature	SKU Number
14953-02	Right hand	M6 X 1.0	Conventional-straight, NH, 1.25 (31.8mm), stop	None	0500210-106-10012-0
14953-02	Left hand	M6 X 1.0	Conventional-straight, NH, 1.25 (31.8mm), stop	None	0500210-106-10012-0