020-0925 Squeeze Release With Assist Bar

This product was specifically designed for off-highway vehicle applications including agricultural and construction equipment that requires a remote inside release. The robust construction is incorporated into round tubing with 90 degree ends for ease of mounting onto a flat door panel. It also provides support for the opening and closing functions of the door and greater ease of operation (ergonomics) over direct releases.

Designed For

  • Medium to heavy weight doors for off-highway doors where it is desirable to have an assist bar in conjunction with a cable-driven latch release

Features/Benefits

  • Robust squeeze release is incorporated into round tubing for support of the opening an closing functions of the door
  • Provides ease of operation (ergonomics). The convenient location to suit the door design
  • The cam detail in the inside release is reversible allowing the inside release to be actuated in the opposite direction providing flexibility in the product application

Available

  • Right and left hand configuration
  • Adaptable for doors on either side of vehicle
  • For different tube lengths, consult TriMark engineering
  • Squeeze release is adaptable to several different latch platforms and customization is available
  • Individual system components can be supplied separately as needed for installation into customer specific door designs (TriMark 020-0910 Inside Squeeze Release - Remote)

Material/Finish

  • Inside release components: Glass reinforced nylon
  • Tubes: Painted steel
  • Mounting end: Glass-reinforced nylon

Installation 

  • Tubing assembly - installs with (4) M6 x 1.0 fasteners (supplied)
  • The 020-0910 inside release sub-assembly installs with (2) M5 thread forming cap screws into the pipe and includes a flange that covers the tubing cutout

U.S. Patent No. 8,011,699

Caution: Product does not meet the locking requirements for FMVSS 206 (ECE R11).

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

020-0925 Squeeze Release With Assist Bar

Please specify search criteria:

 

  • Handing :

 

  • Tube O.D. :

 

  • Tube Mounting Length :

 

  • Orientation of Release :

 

  • Location of Release :

CompareCatalog NumberTriMark NumberHandingTube O.D.Tube Mounting LengthOrientation of ReleaseLocation of ReleaseStatus CodeSample RequestCAD Drawing
0200925-1-1-01-02-0133547-01 Right Hand 1.000 (25.4MM) 350MM 90 degrees Centered between endsA/A
0200925-2-1-01-01-0133546-01 Left Hand 1.000 (25.4MM) 350MM 270 degrees Centered between endsA/A
    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale